درباره ما
MIL-DTL-53022E
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
| contributor author | ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate | |
| date accessioned | 2017-09-04T15:36:55Z | |
| date available | 2017-09-04T15:36:55Z | |
| date copyright | 01/19/2012 | |
| date issued | 2012 | |
| identifier other | OTHWTEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho1626AF679D40AC4/handle/yse/38740 | |
| description abstract | This specification covers a flash drying, corrosion inhibiting epoxy primer for ferrous and nonferrous substrates. The primer is lead and chromate free and meets the air pollution requirements for solvent emissions.Intended Use: The primer described in this specification, which is lead and hexavalent chromium free, is intended for use on clean, chemically pretreated surfaces in camouflage systems. Type II formulations will meet a 420 g/l (3.5 lbs/gal) maximum VOC content requirement. Type III and IV formulations will meet a 340 g/l (2.8 lbs/gal) maximum VOC content requirement and be HAP-free. Type IV will also provide enhanced corrosion performance of 1,000 hours salt spray and 40 cycles on the cyclic corrosion test. This epoxy primer should not be used on aircraft or any associated components of the aircraft. The proper aircraft primers are either MIL-PRF-23377 or MIL-PRF-85582. | |
| language | English | |
| title | MIL-DTL-53022E | num |
| title | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE | en |
| type | standard | |
| page | 21 | |
| status | Active | |
| tree | ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012 | |
| contenttype | fulltext | |
| subject keywords | Aluminum | |
| subject keywords | Camouflage system | |
| subject keywords | HAP | |
| subject keywords | Metal | |
| subject keywords | Panels | |
| subject keywords | Steel | |
| subject keywords | VOC |
