IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions
Now showing items 741-760 of 2832
-
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Abstract: Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest ...Subject(s) : regulating transformers , power transformers , mechanical requirements , IEEE C57.12.00™ , electrical requirements , autotransformers , distribution transformers , -
IEEE Recommended Practice for Specifying Electric Submersible Pump Cable--Polypropylene Insulation
Abstract: Minimum requirements for the design, construction, manufacturing, testing, purchasing, and application of electric submersible pump cable are presented. The cable is round or flat, with polypropylene insulation, nitrile ...Subject(s) : ampacity ratings , ESP , cable construction , EPDM , submersible pump cable , IEEE 1017.3™ , ESP cable , IEEE 1019™ , electric submersible pump , assembly , polypropylene , cable testing , ethylene--propylene diene monomer , -
IEEE Standard for Wide-Block Encryption for Shared Storage Media - Redline
Abstract: EME2-AES and XCB-AES wide-block encryption with associated data (EAD) modes of the NIST AES block cipher, providing usage guidelines and test vectors, are described. A wide block encryption algorithm behaves as a single ...Subject(s) : encryption with associated data (EAD) , extended codebook mode of operation (XCB) , security , encryption , IEEE 1619.2 , data-at-rest security , encrypt-mix encrypt-v2 mode of operation (EME2) , storage , -
IEEE Guide for Measuring Method of Overhead Power Transmission Line Galloping Based on Monocular Video
Abstract: Overhead transmission line galloping is common in many countries, and the measurement and research for galloping have become increasingly necessary. Meanwhile, the development of machine vision technology provides a good ...Subject(s) : field measurement , feature point , monocular video , overhead transmission line , IEEE 2828 , galloping , -
ISO/IEC/IEEE International Standard - Systems and software engineering -- Design and development of information for users
Subject(s) : ISO-IEC-IEEE 26514 , software engineering , design strategy , development stage , -
IEEE Standard for High-Voltage Gas-Insulated Substations Rated Above 52 kV - Redline
Abstract: The technical requirements for the design, fabrication, testing, and installation of a gas insulated substations are covered. The parameters to be supplied by the purchaser are set, and the technical requirements for the ...Subject(s) : gas-insulated metal enclosed switchgear , GIS installation , sulfur hexafluoride , gas-insulated switchgear , gas-insulated substation , GIS design , GIS testing , GIS , IEEE C37.122(TM) , GIS equipment , SF6 , -
IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems - Redline
Abstract: Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power ...Subject(s) : PV systems , photovoltaic systems , distributed energy resources , energy storage , IEEE Std1562 , -
IEEE Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering - Redline
Abstract: Letter symbols to represent various quantities used in electrical science and technology are presented in this standard.Subject(s) : letter symbols , SI , symbols , measurement units , metrology , IEEE 280™ , metric system , -
IEEE Guide for the Rehabilitation of Hydroelectric Power Plants - Redline
Abstract: This guide is intended for the hydroelectric power industry to assist hydroelectric power plant owners, operators, and designers in the economic (feasibility) and technical evaluation (electrical aspects) of existing ...Subject(s) : control , fire protection , cable and raceway , turbine , generator , lubrication , machine shop , ventilating and air conditioning , governor , crane , hydroelectric , lighting , transformer , protection , plant security , compressed air , UPS , rehabilitation , water , grounding heating , drainage , telephone , arc-flash , IEEE 1147™ , excitation , -
IEEE Guide for Protecting Power Transformers - Redline
Abstract: Guidelines for protecting three-phase power transformers of more than 5 MVA rated capacity and operating at voltages exceeding 10 kV is provided to protection engineers and other readers in this guide. In some cases, a ...Subject(s) : grounding transformer , magnetizing inrush , volts-per-hertz protection , overcurrent protection , transformer protection , current transformer , IEEE C37.91 , regulating transformer , sudden pressure relay , gas accumulator relay , differential protection , transformer overexcitation , power transformer , -
IEEE Guide for the Application of Electric Machines in Zone 2 and Class I, Division 2 Hazardous (Classified) Locations - Redline
Abstract: Three-phase and single-phase ac synchronous and induction electric machines in ratings 0.18 kW (1/4 hp) and larger are covered in this guide. Primary emphasis is on the use of open or nonexplosionproof or nonflameproof ...Subject(s) : adjustable speed drive; autoignition temperature; Class I , Division 2; classified locations; electric machine; enclosure sparking; generator; hazardous locations; IEEE 1349; induction motor; label test; motor; motor enclosure; motor temperature; multisection motor; paint test; rotor; rotor sparking; rotor temperature; space heater test; synchronous motor; T Code; temperature code , Zone 2 , -
IEEE/ISO/IEC International Standard for Software and systems engineering--Software testing--Part 3:Test documentation - Redline
Abstract: The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for software testing that can be used by any organization when performing any form of ...Subject(s) : Test Plan , verification and validation. , 29119 , Test Planning Process , 29119-1 , software testing , -
IEEE Recommended Practice for Conductor Protection in Industrial and Commercial Power Systems
Abstract: The protection of power cables used in industrial and commercial power systems is covered in this recommended practice. It is likely to be of greatest value to the power-oriented engineer with limited experience in the ...Subject(s) : power distribution protection , power system protection , overcurrent protection , IEEE 3004.7 , conductors , wire , -
Iso/iec/ieee international standard - software and systems engineering - software testing -- part 2: test processes - redline
Subject(s) : software development lifecycle models , ISO-IEC-IEEE International Standard , systems engineering , software testing , test processes , -
IEEE Guide for Rail Transit Traction Power Systems Modeling - Redline
Abstract: A description of the data, techniques, and procedures typically used in modeling and analysis of traction power systems is provided in this guide.Subject(s) : modeling , analysis , traction power , IEEE 1653.3 , -
IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities - Redline
Abstract: Guidance for the proper installation of cable in generating stations and industrial facilities is provided in this recommended practice.Subject(s) : cmil , conduit , bend radius , IEEE 1185 , American wire gauge , outside diameter , pull tension , sidewall bearing pressure , cable tray , pull back , metric units , English units , figure 8 , cable jamming , cable testing , pulling bend radius , AWG , basket grip , swivel , training bend radius , overall diameter , slack puller , cable cleats , galloping , installation , ropes , duct bank , OD , sidewall pressure , cable ties , ducts , sleeve , kcmil , trench , luff , wire way , pullby , jam ratio , cable , wire , -
IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part V: Transmission Systems and Subtransmission Systems - Redline
Abstract: Basic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or subtransmission system are covered in this guide. An apparatus to be used to achieve the ...Subject(s) : grounding , series compensation , transmission systems , subtransmission systems , equipment neutral grounding , IEEE C62.92.5 , transformer tertiary systems , electrical utility systems , neutral grounding , -
A Call to Action for Businesses Using AI - Ethically Aligned Design for Business
Abstract: In this paper, you will find a straightforward overview of the value and necessity of utilizing AI ethics for businesses, recommendations for creating a sustainable culture of AI ethics, the skills required to do this, and ...Subject(s) : human-centric AI , Ethically Aligned Design , tech-centric , -
Measuring What Matters in the Era of Global Warming and the Age of Algorithmic Promises
Abstract: The future has already arrived in the form of our children. These children are raising their voices all around the world, demanding policy makers and technologists take the necessary steps to secure their futures. This ... -
IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications - Redline
Abstract: Recommended practices for the design of dc power systems for stationary applications are provided in this document. The components of the dc power system addressed by this document include lead-acid and nickel-cadmium ...Subject(s) : cross-tie , duty cycle , auxiliary , distribution , control , selective protection , IEEE 946 , telecommunication , protection coordination , reserve , nuclear , short-circuit , charger sizing , battery charger , battery , rectifiers , substation , ground detection , generating station , dc , panels , backup , instrumentation , direct current ,

درباره ما