درباره ما
IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions
Now showing items 801-820 of 2832
-
ISO/IEC/IEEE International Standard - Systems and software engineering--Software life cycle processes--Part 2: Relation and mapping between ISO/IEC/IEEE 12207:2017 and ISO/IEC 12207:2008
Abstract: ISO/IEC/IEEE 12207-2 provides the mapping expressing corresponding relations between software life cycle processes in ISO/IEC/IEEE 12207:2017 and the processes in the previous edition ISO/IEC 12207:2008. These relations ...Subject(s) : software life cycle processes , systems engineering , ISO/IEC/IEEE 12207-2 , ISO/IEC 12207:2008 , ISO/IEC/IEEE 12207:2017 , ISO/IEC/IEEE international standard , software engineering , -
ISO/IEC/IEEE International Standard - Systems and software engineering--Life cycle management--Part 3: Guidelines for the application of ISO/IEC/IEEE 12207 (software life cycle processes)
Abstract: ISO/IEC/IEEE 24748-3 provides guidance on the application of the software life cycle processes standard, ISO/IEC/IEEE 12207:2017. This document establishes guidance to implement a common framework for software life cycle ...Subject(s) : life cycle process , project , system , life cycle , stage , software , software engineering , -
IEC/IEEE International Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1528: Human models, instrumentation, a
Abstract: The objective of this document is to provide procedures for measuring the human exposure from devices intended to be used at a position near the human head or body. It was developed to provide procedures to evaluate ...Subject(s) : human exposure measurement system , EMF , frequency 4 MHz to 10 GHz , SAR measurement protocols , specific absorption rate , radio transmitters , mobile telephones , millimetre-wave power density assessment , electromagnetic field , radiofrequency transmitting devices , hand-held body-mounted wireless communication devices , RF transmitting devices , radiofrequency fields , cordless telephone , SAR measurement uncertainty evaluation , cordless microphones , frequency 6 GHz to 300 GHz , personal computers , -
IEC/IEEE International Standard - Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communication devices, 30 MHz to 6 GHz – Part 4: General requirements for using the finite element method for SAR calcula
Abstract: This paper dealt with following topics: SAR calculation; finite element method ; and weak patch-test.Subject(s) : wireless communication devices , weak patch -test , peak spatial-average specific absorption rate , finite element method , SAR calculation , -
IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems - Redline
Abstract: The application of the analysis of gases dissolved in the fluids of fluid-filled cable systems is discussed in this standard with respect to the procedures for sampling, obtaining the dissolved gas data, and analyzing the results.Subject(s) : fluid-filled cable , aging , dissolved gas analysis , IEEE 1406 , transmission cable , cable diagnostic , gas analysis , remaining life , pipe-type , gas-filled cable , liquid filled cable , DGA , self-contained , -
IEEE Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter--Part 3: Thyristor Bypass Switch
Abstract: An approach to preparing a specification for the thyristor bypass switch (TBS) of a unified power flow controller (UPFC) using modular multilevel converter (MMC) technology is documented by this guide. The intention of ...Subject(s) : thyristor bypass switch , IEEE 2745.3 , fast bypass system , test , function requirements , system composition , performance requirements , -
IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
Abstract: Test procedures and requirements are provided for all indoor and outdoor cable terminations used on alternating-current shielded cables having laminated insulation rated 2.5 kV through 765 kV and extruded insulation rated ...Subject(s) : IEEE 48™ , test requirements , environmental exposure , correction factors , accelerated contamination testing , nonstandard service conditions , rating , standard service conditions , dielectric field tests , solar radiation , ultraviolet light , -
IEEE Standard for Local and metropolitan area networks -- Time-Sensitive Networking for Fronthaul - Amendment 1: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standards
Abstract: Enhancements to fronthaul profiles are defined in this amendment to IEEE Std 802.1CM-2018 in order to address new developments in fronthaul interface standards and in related synchronization and syntonization standards.Subject(s) : VLAN Bridge , IEEE 802.1CM™ , time-sensitive networking , VLAN , bridged network , synchronization , CPRI , IEEE 802.1™ , eCPRI , IEEE 802.1CMde™ , TSN , fronthaul , IEEE 802® , F1 , Virtual Local Area Network , amendment , -
IEEE/IEC International Standard - Nuclear facilities - Equipment important to safety - Seismic qualification
Abstract: This standard is applicable to electrical equipment important to safety and its interfaces that are necessary to perform a safety function, or whose failure could adversely affect the safety functions of other equipment.Subject(s) : IEEE/IEC International Standard , safety function , Seismic qualification , electrical equipment , Nuclear facilities , -
IEEE Guide for Interactions Between Power System Disturbances and Surge Protective Devices
Abstract: Information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that can occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected ...Subject(s) : noise , voltage sag , IEEE C62.41.3 , SPD , surge-protective device , power system disturbance , harmonics , swell , voltage surge , -
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Abstract: Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current ...Subject(s) : lightning protection , IEEE C62.11 , metal-oxide surge arrester , single-impulse charge transfer rating , MOSA , MCOV , maximum continuous operating voltage , discharge voltage , TOV , thermal charge transfer rating , thermal energy withstand rating , surge arrester , metal-oxide disk , charge transfer , discharge current , -
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 33: YANG Data Model for Connectivity Fault Management
Abstract: A YANG data model that supports configuration, status reporting, and monitoring for Connectivity Fault Management (CFM) for Two-Port MAC Relays, Customer VLAN Bridges, and Provider Bridges is further developed by this ...Subject(s) : IEEE 802.1Qcp™ , local area networks , Connectivity Fault Management , CFM , IEEE 802.1Q™ , Virtual Bridged Local Area Networks , Bridged Local Area Networks , MAC Bridges , virtual LANs , YANG , IEEE 802.1Qcx™ , LANs , metropolitan area networks , amendment , -
IEEE Guide and Tutorial for the Application of High-Voltage (> 1000 V) Fuses and Accessories
Abstract: Information for understanding the construction, operation, and application of high-voltage (> 1000 V) fuses and accessories, intended for use on alternating current (ac) electrical distribution systems is provided. ...Subject(s) : time-current characteristics , TCC , current-limiting fuses , fuse coordination , IEEE C37.48 , fuse application , expulsion fuses , high-voltage fuses , rated maximum voltage , IEEE C37.48.1 , -
IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V Amendment 1
Abstract: Covered in this amendment are changes in di/dt limitations for non-oil circuit breakers. A section has been added describing possible delayed current zeros when doing a rapid close-open of a line circuit breaker (CO) when ...Subject(s) : circuit breaker capacitive inrush/outrush limitations , IEEE C37.012a , capacitive current switching , switching reactor compensated lines , -
IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
Abstract: Standard terminal markings and connections are described for single-phase and three phase distribution, power, and regulating transformers. For terminal markings, it covers sequence designation, external terminal designation, ...Subject(s) : transformer connection , IEEE C57.12.70 , transformer terminals , transformer polarity , -
IEEE Standard for Low-Rate Wireless Networks--Amendment 2: Low Power Wide Area Network (LPWAN) Extension to the Low-Energy Critical Infrastructure Monitoring (LECIM) Physical Layer (PHY)
Abstract: The existing low-energy critical infrastructure monitoring (LECIM) frequency shift keying (FSK) physical layer of IEEE Std 802.15.4-2020 is extended to be more robust in the presence of interference and achieve higher link ...Subject(s) : PAN , PHY , IEEE 802.15.4w , wireless personal area network , low data rate , physical layer , LECIM , low power wide area network , splitting , ultra-low power , WPAN , low-energy critical infrastructure monitoring , radio frequency , LPWAN , RF , IEEE 802.15.4 , personal area network , amendment , -
IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications
Abstract: Recommended practices for the design of dc power systems for stationary applications are provided in this document. The components of the dc power system addressed by this document include lead-acid and nickel-cadmium ...Subject(s) : cross-tie , duty cycle , auxiliary , distribution , control , selective protection , IEEE 946 , telecommunication , protection coordination , reserve , nuclear , short-circuit , charger sizing , battery charger , battery , rectifiers , substation , ground detection , generating station , dc , panels , backup , instrumentation , direct current , -
IEEE Recommended Practice for Improving the Reliability of Emergency and Stand By Power Systems
Abstract: Described in this recommended practice are methods for improving the reliability of emergency and stand by power systems. Some of the factors examined include the specific application of the emergency or stand by equipment, ...Subject(s) : reliability , generator testing , stand by power , emergency power , IEEE 3005.4 , industrial and commercial power systems , commissioning , -
IEEE Health informatics--Personal health device communication Part 10407: Device specialization--Blood pressure monitor - Redline
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth blood pressure monitor devices and compute ...Subject(s) : IEEE 11073-10407 , personal health devices , medical device communication , blood pressure monitor , -
IEEE Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants - Redline
Abstract: Inspection procedures and tests for use following the completion of the installation of components and systems through to commercial operation are provided. This guide is directed to plant owners, designers, and contractors ...Subject(s) : testing , electrical systems , commissioning , hydroelectric power plant , IEEE 1248 ,