درباره ما
NACE - NACE International: Recent submissions
Now showing items 321-340 of 344
-
NACE TM0187
Abstract: General
This standard establishes a test method to measure the ability of elastomeric materials to withstand static exposure to vapor phase sour gas environments (e.g., gaseous hydrocarbons with hydrogen ... -
NACE 02107
Abstract: Foreword
This technical committee report describes current industry practices and gives information on the most commonly used generic coating systems for protection of threaded fasteners used with ... -
NACE SP0487
Abstract: This standard provides recommended selection factors, surface preparation requirements, and references to applicable standard evaluation and quality control tests for interim coatings (rust preventives and vapor phase ... -
NACE 1C184
Abstract: Foreword
This NACE technical committee report has been prepared to provide basic information on hydrogen permeation measurement and monitoring technology. It describes the background of hydrogen ... -
NACE SP0403
Abstract: This standard practice establishes guidelines to avoid caustic SCC of CS refinery equipment and piping. It addresses applications that use "fresh" caustic. Caustic SCC has been observed in the presence of contaminated ... -
NACE RP0394
Abstract: General
This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of plant-applied, fusion-bonded epoxy (FBE) coatings to the external surfaces ... -
NACE RP0399
Abstract: General
This standard establishes minimum requirements to ensure proper application and petformance of a plantTo ensure its long-term petformance. applied coal tar enamel system to the external sutfaces ... -
NACE SP0196
Abstract: General
This standard presents standard practices for using galvanic anodes to apply CP to the internal submerged surfaces of steel tanks used for the storage of potable and reclaimed water, drinking ... -
NACE SP0388
Abstract: General
This standard presents recommended practices for applying impressed current cathodic protection to the internal submerged surfaces of steel tanks used for the storage of natural waters. ... -
NACE 2203
Abstract: Foreword
Concrete is subject to deterioration by a variety of mechanisms. Properly selected and applied flooring systems can protect from deterioration caused by impact, abrasion, and chemical attack, ... -
NACE RP0303
Abstract: This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of field-applied, heat-shrinkable sleeves to the external surfaces of coated pipe. Included are methods ... -
NACE TPC 11
Abstract: Introduction
A corrosion control coordinating committee exists for three purposes: to keep all companies that lie in the committee's geographical area of concern informed of activity by others that ... -
NACE TM0173
Abstract: General
This standard describes two methods for evaluating water quality for subsurface injection: Procedure A—rate versus cumulative volume test (for water-quality monitoring) and Procedure ... -
NACE TM0192
Abstract: This standard establishes a test method to measure the effect on elastomeric materials of rapid depressurization from elevated pressures in dry CO2 environments. It is designed for testing O-rings or other test ... -
NACE 1E100
Abstract: Introduction
TG 429 was formed to revise the 2010 edition of NACE Publication 1E100, which provides engineering symbols related to CP that are commonly used in industry and disseminates this information ... -
NACE SP0285
Abstract: Introduction
This standard presents standard practices for effective control of external corrosion of UST systems by CP. It is intended to serve as a guideline to establish minimum requirements for using CP to control ... -
NACE SP0200
Abstract: General
Steel casings are used to install and maintain pipeline crossings such as those at road and railroad right-of-ways. This standard details acceptable practices for the design, fabrication, ... -
NACE 34109
Abstract: Foreword
This state-of-the-art report describes the associated corrosion mechanisms in refinery crude distillation unit (CDU) distillation tower overhead systems and current industry practices for ... -
NACE MR0103
Abstract: This standard establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase ... -
NACE SP0387
Abstract: General
This standard defines minimum physical quality and inspection standards for cast galvanic anodes for offshore applications.
This standard is applicable to typical offshore platform anode ...