درباره ما
ASME PTC 6S REPORT
Procedures for Routine Performance Tests of Steam Turbines
Organization:
ASME - ASME International
Year: 2009
Abstract: Sections 3 through 5 of this Report present general recommendations for instrumentation and test planning. These recommendations are based on current industry practice for the periodic determination of turbine-cycle performance. Section 6 discusses interpretation of test results and shows typical plots of test data for analysis of turbine performance. Sections 7 through 12 present test procedures for selected types of turbine cycles. Each of these procedures contains specific recommendations for instrumentation and method for testing a selected turbine type. Although all possible turbine types are not covered, some typical examples are presented. Combinations of the types presented may be used to cover other arrangements. For each recommended test procedure, the expected value of repeatability is estimated on the basis of current industry experience. This value of repeatability must be used to judge the significance of the indicated level of performance as compared to the chronological trend of past performance. (See para. 3.8.3 for discussion of repeatability.)
Collections
:
-
Statistics
ASME PTC 6S REPORT
Show full item record
| contributor author | ASME - ASME International | |
| date accessioned | 2017-09-04T18:33:43Z | |
| date available | 2017-09-04T18:33:43Z | |
| date copyright | 1988.01.01 (R 1995)(R 2003)(R 2009) | |
| date issued | 2009 | |
| identifier other | JEWOGBAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho162sAF679D4049A961598F1EFDEC014A0Facilities%114ngineering%20Command%22/handle/yse/215988 | |
| description abstract | Sections 3 through 5 of this Report present general recommendations for instrumentation and test planning. These recommendations are based on current industry practice for the periodic determination of turbine-cycle performance. Section 6 discusses interpretation of test results and shows typical plots of test data for analysis of turbine performance. Sections 7 through 12 present test procedures for selected types of turbine cycles. Each of these procedures contains specific recommendations for instrumentation and method for testing a selected turbine type. Although all possible turbine types are not covered, some typical examples are presented. Combinations of the types presented may be used to cover other arrangements. For each recommended test procedure, the expected value of repeatability is estimated on the basis of current industry experience. This value of repeatability must be used to judge the significance of the indicated level of performance as compared to the chronological trend of past performance. (See para. 3.8.3 for discussion of repeatability.) | |
| language | English | |
| title | ASME PTC 6S REPORT | num |
| title | Procedures for Routine Performance Tests of Steam Turbines | en |
| type | standard | |
| page | 139 | |
| status | Active | |
| tree | ASME - ASME International:;2009 | |
| contenttype | fulltext |