درباره ما
NACE - NACE International: Recent submissions
Now showing items 301-320 of 344
-
NACE 6A100
Abstract: Introduction
The decision to use protective coatings, cathodic protection, or both is often based on economic, safety, and environmental issues as well as the particular conditions of the structure ... -
NACE 6G198
Abstract: This document covers procedures, equipment, and materials involved in a variety of air/water/abrasive, water/abrasive, and water-pressurized abrasive blast cleaning systems. Equipment usage and safety are also discussed. -
NACE SP0108
Abstract: General
This standard provides guidelines for establishing minimum requirements for the corrosion protective coatings on steel offshore structures associated with oil and gas production, and on the ... -
NACE TM0108
Abstract: General
Test Method for Catalyzed Titanium
This test method is for anodes comprised of a titanium substrate to which a mixed metal oxide (MMO) catalytic coating has been applied. This test method ... -
NACE SP0169
Abstract: Foreword
This standard practice presents procedures and practices for achieving effective control of external corrosion on buried or submerged metallic piping systems. These recommendations are also ... -
NACE SP0204
Abstract: Introduction
This standard covers the NACE SCCDA process for buried steel pipeline systems. It is intended to serve as a guide for applying the NACE SCCDA process on typical petroleum (natural gas, crude oil, ... -
NACE SP0177
Abstract: General
This standard presents acknowledged practices for the mitigation of AC and lightning effects on metallic structures and corrosion control systems.
This standard covers some of the basic ... -
NACE SP0315
Abstract: This standard provides a procedure that shall be used to (1) assess structures for atmospheric corrosion; (2) assess the level of risk to the structure in terms of corrosion attack and degradation to the existing coating ... -
NACE 31105
Abstract: Foreword
Mineral scales, hereinafter referred to as scales, are adherent forms of inorganic solids that deposit on production equipment surfaces. Oilfield brines containing, among other ... -
NACE 35201
Abstract: General
A CP coupon is used to simulate coating defects (holidays) on the structure being evaluated. The CP coupon is installed near the structure and then connected to it through an aboveground test ... -
NACE TM0172
Abstract: This standard provides a procedure for conducting a test to determine the corrosive properties of gasoline and distillate fuels in preparation for transport through a pipeline. Also included is information on test ... -
NACE SP0200
Abstract: Steel casings are used to install and maintain pipeline crossings such as those at road and railroad rights of way. This standard details acceptable practices for the design, fabrication, installation, and maintenance ... -
NACE SP0213
Abstract: General
Numerical Salt Level Values
The assessment and determination of surface contamination (by salts) prior to application of protective coatings can be critical to estimating and attaining the ... -
NACE MR0174
Abstract: Proper selection and use of corrosion inhibitors provides extended protection of sucker-rod threads and box cavities against the effects of corrosive well fluids that may move in and out of these box cavities, and ... -
NACE 14C296
Abstract: Introduction
Corrosion of stainless steel, carbon steel, and aluminum takes place to varying degrees under thermal insulation in the presence of moisture. Water and/or steam may enter the insulation ... -
NACE TM0109
Abstract: General
Aboveground Survey Techniques
This standard presents acknowledged procedures for the application of aboveground techniques to evaluate the coating condition of underground metallic pipelines. ... -
NACE WJ-2
Abstract: General
This standard defines the Very Thorough Cleaning (WJ-2) degree of surface cleanliness of uncoated or coated metallic substrates by use of waterjet cleaning. The defined degree of cleanliness ... -
NACE MR0175/ISO 15156 CIR 2 TO PT 2
Abstract: This part of ANSI/NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural ... -
NACE 31014
Abstract: Introduction
Infrastructure in oil and gas production environments commonly experiences internal corrosion. Therefore, a significant portion of integrity management is devoted to controlling internal ... -
NACE TM0177
Abstract: Section 1: General
This standard covers the testing of metals subjected to tensile stresses for resistance to cracking failure in low-pH aqueous environments containing H2S. Carbon and low-alloy steels are commonly ...