DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code: Recent submissions
Now showing items 381-400 of 1357
-
A-A-59176A
Abstract: This commercial item description (CID) covers one type of personal distress marker light. Intended Use: The personal distress marker light is intended for use as a high intensity visual distress signal by ... -
A-A-50589
Abstract: The General Services Administration has authorized the use of this commercial item description as a replacement for MS15572 which is canceled. -
A-A-52035
Abstract: The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-P-3756.
This description covers levels used for making differential elevation ... -
A-A-50453
Abstract: The General Services Administration has authorized the use of this commercial item description as a replacement for MS15568 which is canceled. -
MIL-L-3891B REINST NOTICE 4
Abstract: This specification covers two types of photo-luminescent materials for operational military uses in various forms, shapes, colors, and sizes. Intended Use: Phosphorescent material is used where it is required ... -
MIL-I-45932
Abstract: This specification covers the requirements for thin wall, solid bushing, locked in, screw thread inserts. The method of locking in the insert into the parent material to resist rotation to be by means of an integral locking ... -
A-A-52080B
Abstract: This Commercial Item Description (CID) covers nylon tape, flat braided, for lacing and tying. Intended Use: The tape is intended for lacing and tying electrical wire and cable bundles. Tape with finish C ... -
MS18236 REV C
Abstract: This military standard is approved for use by all Departments and Agencies of the Department of Defense. Selection for all new engineering and design applications and for repetitive use shall be made from this document. -
A-A-50212A
Abstract: The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification GG-P-118.
This description covers stepping or folding parallel rulers used in general ...