MIL-PRF-62315C

HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR

contributor author	ARMY - AT - Tank-Automotive and Armaments Command
date accessioned	2017-09-04T17:21:23Z
date available	2017-09-04T17:21:23Z
date copyright	07/25/1997
date issued	1997
identifier other	ZSZAEAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho162sear3FCDCAC4/handle/yse/144584
description abstract	This specification establishes the performance, design, testing, manufacturing, and acceptance requirements for a forced air inlet personnel heater assembly, referred to herein as "heater" (see 6.1). Heaters will be dual or single air of the following types (see 6.4.1 and 6.4.2): Type I - Extended operating range. Type II - Standard operating range. Intended Use: The heater furnished under this specification is intended to supply warm air to the crew compartment of military vehicles. Type I heaters may be substituted for type II heaters. Type II heaters will not be substituted for type I heaters. Heaters are used on M992 Series FAASV and M109 Series SPH.
language	English
title	MIL-PRF-62315C	num
title	HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR	en
type	standard
page	26
status	Active
tree	ARMY - AT - Tank-Automotive and Armaments Command:;1997
contenttype	fulltext
subject keywords	Air discharge rate
subject keywords	Environmental conditions
subject keywords	Fuel consumption
subject keywords	Heat output
subject keywords	Overheat switch
subject keywords	Protective coating
subject keywords	Smoke density
subject keywords	Toxic fumes