Now showing items 1-20 of 1523

      • NATO STANAG 4041 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1960
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: The purpose of this agreement is to standardize the minimum requirements for the propellant ingredient DNT (Dinitrotoluene) and thus make it acceptable to all NATO member countries.
        The standard specification is ...
      • NATO STANAG 4009 P4 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1960
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: This standard will apply to all new procurement semi-trailers of a gross weight from 22 to 72 ton (48,400-160,000 lb) of the transport wheeled tactical and general service classes intended for the Armed Forces of the North ...
      • NATO STANAG 4026 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1962
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: a. The specification for Picrite (Nitroguanidine) is not identical in every NATO nation. This situation could lead to difficulties should one nation need to use Picrite (Nitroguanidine) previously received from another ...
      • NATO A-MED P-5 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1965
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: This Phrase Book consists of ten sections corresponding to the ten NATO Languages. Each section contains detailed instructions about the correct use of the book, and an index grouping the phrases etc. by subject matter.
      • NATO STANAG 2020 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1967
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: OBJECT
        The object of this Agreement is to standardize the format for operational situation reports for use by the NATO Armed Forces below the Army Group level operating on land.
      • NATO STANAG 4082 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1969
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: Scope:
        The aim of this agreement is to define a computer meteorological message and to standardize the number of its information digits and their meanings for use by any artillery ...
      • NATO STANAG 4044 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1969
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: OBJECT
        a. The object of this Agreement is to adopt a common standard atmosphere for all NATO purposes.
        b. This Agreement applies to all NATO Armed Forces.
      • NATO STANAG 2256 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1971
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to ensure that nations, when producing Military Geographic Documentation (MGD) on Inland Hydrography for use of NATO Forces, standardize its presentation in accordance with this STANAG. ...
      • NATO STANAG 3710 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1972
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to standardize sufficiently, Military City Maps prepared for use by NATO Armed Forces to enable forces familiar with such maps, prepared by one member nation, to use those prepared ...
      • NATO STANAG 3643 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1973
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to standardize the coatings used on glass elements in displays to reduce the reflections under all ambient illuminated conditions in Aircrew Stations.
      • NATO STANAG 2339 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1975
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this Agreement is to standardize a system for marking the length and width of operational footwear, the guiding details of which are provided below.
      • NATO STANAG 2271 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1975
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to ensure that nations, when producing MGD on Urban Areas for use by NATO Forces, standardize its presentation in accordance with this STANAG. Guidance is also given in Annex B on ...
      • NATO STANAG 3312 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1975
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to standardize on the profile dimensions of flanges for use with V-band couplings for aerospace piping and ducting, and the equipment connected thereto, and to establish ranges of ...
      • NATO STANAG 2259 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1975
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to ensure that nations, when producing MGD on terrain for use by NATO Forces standardize its presentation in accordance with this agreement.
      • NATO STANAG 3205 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1976
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to standardize the format and use of a template for designating a point on imagery.
      • NATO STANAG 4139 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1976
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: The aim of this agreement is to define the degree of balance required in shipboard rotating machinery to avoid vibration and early wear, and to ensure a uniform level of balancing.
      • NATO STANAG 2263 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1976
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to ensure that nations, when producing MGD on Coastal Areas and Landing Beaches for use by NATO Forces, standardize its presentation in accordance with this STANAG.
      • NATO STANAG 4143 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1976
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to facilitate the provision of electric power to surface ships of NATO navies from the shore, in NATO Naval Bases.
      • NATO STANAG 2310 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1976
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to standardize, for the use of the NATO Armed Forces, the design of small arms ammunition (7.62 mm) to ensure functional interchangeability of ammunition on the battlefield.
      • NATO STANAG 1179 

        Type: standard
        Source: NATO - North Atlantic Treaty Organization:;1977
        Organization : NATO - North Atlantic Treaty Organization
        Abstract: AIM
        The aim of this agreement is to lay down procedures which may be followed in the event of maritime incidents involving units or personnel of two or more NATO nations.