Now showing items 161-180 of 2147

    • MIL-W-8982/6 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1986
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the combination wrenches described herein shall consist of this document and ...
    • MIL-DTL-22520/40 VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2013
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-85694A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2013
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the requirements for blended spectrometric oil standards for use in calibrating or verifying the calibration of spectrometers used in spectrometric analysis of metallic elements found in oils and ...
    • MIL-P-85661 VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1991
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-6363/14A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1997
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
      The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ...
    • MIL-B-85464 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1981
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for manufacture and acceptance of the MARK 38 MOD 2 Fuze Booster, referred to herein as the booster. Intended Use: The booster is intended for use in the ...
    • MIL-F-8815/5A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1976
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the filter assembly described herein shall consist of this document and the ...
    • MIL-M-81807A VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1991
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-H-85042A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1983
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the manufacture and inspection of bomb rack hooks. The test limits of this specification define minimum acceptable capabilities.
      Bomb rack hooks covered by this specification shall be of the ...
    • MS16051 REV F 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1987
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-C-22520/34B VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2004
      Organization : NAVY - AS - Naval Air Systems Command
    • TT-T-656C 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1992
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers tricresyl phosphate, a reaction product of cresylic acid and a phosphorus compound. Cresylic acid derived from petroleum or coal tar is acceptable. Intended Use: The uses of tricresyl ...
      Subject(s) : Adhesive , Antiwear agent , Lubrication , Petroleum additive ,
    • A-A-59315/24 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1998
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This commercial item description sheet (CID) covers a tungsten carbide-cobalt powder that is applied using either plasma arc or combustion gas (flame spray) techniques.
    • MIL-N-85005A (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1982
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-L-81561/3 VALID NOTICE 3 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2013
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-B-81793/24 (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1994
      Organization : NAVY - AS - Naval Air Systems Command
    • DOD-I-85390 VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1987
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-L-85546B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1990
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for the manufacture and inspection of the Launcher, Rocket LMU-23A/E and LMU-23B/E. Intended Use: The LMU-23A/E and the LMU-23B/E launchers are intended for ...
      Subject(s) : Firing pin , Firing switch , Igniter , PVU-3A/E , Igniter , PVU-3B/E ,
    • MIL-I-23453 (3) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1984
      Organization : NAVY - AS - Naval Air Systems Command
    • MIL-DTL-15024/3A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1998
      Organization : NAVY - AS - Naval Air Systems Command