NAVY - AS - Naval Air Systems Command: Recent submissions

Now showing items 401-420 of 2147

    • MIL-B-81793/8 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1993
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-DTL-85025B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2007
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers general style, format, and technical content requirements for preparation of Naval Air Training and Operating Procedures Standardization (NATOPS) publications and products. Intended Use: ...

    • MIL-PRF-81542C 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2011
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the requirements for an inflatable one-man, single place life raft. Intended Use: The life rafts are intended for use as emergency equipment by military aircrews forced down at sea. ...
      Subject(s) : Canopy ,

    • W-L-101/1A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1977
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
      (This specification sheet forms a part of the latest issue of ...

    • MIL-I-81969/15A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1979
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the tools described herein shall consist of this document and the latest ...

    • MIL-STD-1334B REINST NOTICE 4 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2008
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-DTL-9370E VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2011
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers automatic pressure-regulating valves for anti-g suits. Intended Use: The pressure regulating valve covered by this specification is intended for use in aircraft to sense changes in ...
      Subject(s) : Acceleration ,

    • MIL-B-913 (1) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1994
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-S-487B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1967
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers the requirements for ground sulfur. (see 6.1). Intended Use: - Sulfur covered by this specification is intended for use as follows: 
              Grade A- For black powder  ...

    • MIL-S-22999/1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1981
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for ...

    • MIL-P-85484 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1982
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for the manufacture and acceptance of the Pod-Tray Subassembly, Simulating Set, hereafter referred to as the pod. Intended Use: The pod is used with the ...

    • MIL-C-85655 VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1991
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-DTL-6363/11A 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1997
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
      The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ...

    • MIL-P-85459 (2) 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1987
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-T-23733A CANC NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2013
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-T-81311A VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1991
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-DTL-6396F VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2013
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-PRF-85036B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1999
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for an opaque, heavy duty barrier material, having a low water vapor transmission rate, and capable of being heat-sealed on both surfaces for use in military packaging (see ...
      Subject(s) : Heat-seal , Opaque , Packaging , Preservation , Water vapor transmission ,

    • MIL-S-23895 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1964
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for the manufacture, inspection and testing of Bomb Shackle Mark 8 Mod 5 which is used to carry and release weapons within the weight limits specified for the applicable ...

    • MIL-R-81939B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1977
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes the requirements for the manufacture and inspection of three types of bomb racks capable of carrying and releasing stores having suspension lugs spaced 355.6 millimeters (14 inches) and 762 ...