درباره ما
ASHRAE LV-11-008
Hot-Water Distribution System Piping Time, Water, and Energy Waste—Phase III: Test Results
| contributor author | ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. | |
| date accessioned | 2017-09-04T18:48:09Z | |
| date available | 2017-09-04T18:48:09Z | |
| date copyright | 01/01/2011 | |
| date issued | 2011 | |
| identifier other | KNXTKEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho162sear79D/handle/yse/229364 | |
| description abstract | ABSTRACT This paper describes results of recent laboratory tests on additional common hot-water distribution system piping sizes and types under a variety of flow rate, temperature, and environmental conditions. The new tests include chlorinated polyvinyl chloride (CPVC) and high-density cross-linked polyethylene (PEX) piping. They also include attic and floor environments. The tests measured the time spent waiting for hot water to arrive at fixtures and the amount of water wasted to drain while waiting. From these, the energy waste associated with the water waste can be computed. Results are presented as plots of the ratio of actual flow volume divided by pipe volume (AF/PV) vs. flow rate, temperatures, and other parameters of importance. Several unanticipated flow regimes were observed that dramatically alter behavior from what might be expected based on either plug-flow or fully developed flow theory. A separate related paper discusses piping heat loss UA factors that were measured. | |
| language | English | |
| title | ASHRAE LV-11-008 | num |
| title | Hot-Water Distribution System Piping Time, Water, and Energy Waste—Phase III: Test Results | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.:;2011 | |
| contenttype | fulltext |
