Show simple item record

ACI 530/530.1 ERTA

Building Code Requirements and Specification for Masonry Structures

contributor authorACI - American Concrete Institute
date accessioned2017-09-04T18:35:16Z
date available2017-09-04T18:35:16Z
date copyright40822
date issued2011
identifier otherJIJHUEAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;query=autho18262NAV9D40-%206972DD6ED52F9FCD0Facilities%20Engineering%20Command%226EFDEC9FCD/handle/yse/217310
description abstractMinimum requirements
This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar.
Governing building code
This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice.
Design procedures
Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following:
(a) Allowable Stress Design of Masonry: Chapter 2.
(b) Strength Design of Masonry: Chapter 3.
(c) Prestressed Masonry: Chapter 4.
(d) Empirical Design of Masonry: Chapter 5.
(e) Veneer: Chapter 6.
(f) Glass Unit Masonry: Chapter 7.
(g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A.
(h) Masonry Infill, Appendix B.
SI information
SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201.
languageEnglish
titleACI 530/530.1 ERTAnum
titleBuilding Code Requirements and Specification for Masonry Structuresen
typestandard
page2
statusActive
treeACI - American Concrete Institute:;2011
contenttypefulltext
subject keywordsAAC
subject keywordsmasonry allowable stress design
subject keywordsanchors (fasteners)
subject keywordsanchorage (structural)
subject keywordsautoclaved aerated concrete masonry
subject keywordsbeams
subject keywordsbuilding codes
subject keywordscements
subject keywordsclay brick
subject keywordsclay tile
subject keywordscolumns
subject keywordscompressive strength
subject keywordsconcrete block
subject keywordsconcrete brick
subject keywordsconstruction
subject keywordsdetailing
subject keywordsempirical design
subject keywordsflexural strength
subject keywordsglass units
subject keywordsgrout
subject keywordsgrouting
subject keywordsjoints
subject keywordsloads (forces)
subject keywordsmasonry cements
subject keywordsmasonry load bearing walls
subject keywordsmasonry mortars
subject keywordsmasonry walls
subject keywordsmodulus of elasticity
subject keywordspilasters
subject keywordsprestressed masonry
subject keywordsquality assurance
subject keywordsreinforced masonry
subject keywordsreinforcing steel
subject keywordsseismic requirements
subject keywordsshear
subject keywordsspecifications
subject keywordssplicing
subject keywordsstrength
subject keywordsstrength design
subject keywordsstresses
subject keywordsstructural analysis
subject keywordsstructural design
subject keywordsties
subject keywordsunreinforced masonry
subject keywordsveneers
subject keywordswalls


Files in this item

Thumbnail
Name:
JIJHUEAAAAAAAAAA.pdf
Size:
119.2Kb
Format:
PDF
View/Open

This item appears in the following Collection(s)

Show simple item record