Defence Standards: Recent submissions
Now showing items 121-140 of 43216
-
NASA-CR-181851
Abstract: The application of selected analysis techniques to low frequency cabin noise associated with advanced propeller engine installations is evaluated. Three design analysis techniques were chosen for evaluation including finite ...Subject(s) : AIRCRAFT NOISE , COMMERCIAL AIRCRAFT , ENERGY METHODS , ENGINE NOISE , FINITE ELEMENT METHOD , LOW FREQUENCIES , NOISE PREDICTION (AIRCRAFT) , PROPELLER NOISE , STRUCTURAL VIBRATION , TRANSPORT AIRCRAFT , VIBRATIONAL SPECTRA , -
MIL-C-81925
Abstract: The equipment covered by this specification shall be for intermediate shop use and shall facilitate the interface and test of the R-1623/APN Radar Receiver, the RT-1028/APN-202 Receiver Transmitter, the MD-817D Modulator, ... -
DSCC-VID-V62/04760 REV A
Abstract: This drawing documents the general requirements of a high performance octal bus transceiver with 3-state outputs microcircuit, with an operating temperature range of −40°C to +85°C. -
SMD-5962-89973 REV H
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ... -
SMD-5962-84095 REV D
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
MIL-PRF-19500/583B
Abstract: This specification covers the performance requirements for NPN , silicon, amplifier transistor. Three levels of product assurance are provided for each device type as specified in MIL-PRF-19500.Intended Use: ... -
DODD 1400.25 VOL 430
Abstract: PURPOSE
Instruction. This Instruction is composed of several Volumes, each containing its own purpose. The purpose of the overall Instruction is to establish and implement policy, establish procedures, ... -
SMD-5962-88775 REV A
Abstract: This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete ... -
A-A-50194B
Abstract: This commercial item description covers the extended cold weather balaclava hood which provides protection for the face, neck and head in cold weather conditions.Subject(s) : Knitted cloth , Wind barrier , -
MIL-DTL-3628/193
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense. -
MIL-STD-2042-4B
Abstract: This standard practice provides detailed methods for installing optical fiber cable cableways and cable protection on surface ships and submarines.
Applicability. These criteria apply to installations on specific ...Subject(s) : Cable runs , Cable tags , Installation of optical fiber cable in cableways , Protection of cables , -
NASA-LLIS-0502
Abstract: Description of Driving Event:
The National Transonic Facility (NTF) is a transonic wind tunnel primarily intended to provide a high Reynolds Number test capability for aerodynamic research and the ...Subject(s) : Facilities , Safety & Mission Assurance , Test Facility , -
A-A-52512
Abstract: This CID covers requirements for a single-drum 1 ton pneumatic winch to be used on port construction platforms in marine environments. -
MIL-B-162D