درباره ما
Defence Standards: Recent submissions
Now showing items 281-300 of 43216
-
MIL-B-913/9
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
A-A-59652B
Abstract: This commercial item description (CID) covers government acquisition requirements for complete (cone with rollers and cup) single row, tapered, roller bearings with steep angle, flanged cup (type TSSF) for general purpose ...Subject(s) : Bore , Cone , Cup , Load , Width , -
NASA-TP-3637
Abstract: The computer codes, AER02S and WINGDES, are now widely used for the analysis and design of airplane lifting surfaces under conditions that tend to induce flow separation. These codes have undergone continued development ...Subject(s) : AERODYNAMIC , AERODYNAMICS , ANALYSIS , BOUNDARY , COMPUTER , DRAG , FLOW , LAYER , LIFT , MANUALS , NUMERICAL , OPTIMIZATION , PREDICTIONS , PROGRAMS , SEPARATED , SEPARATION , USER , -
NASA-LLIS-1804
Abstract: Abstract:
Preferred Practice for Design & Test. Worst Case Analysis (WCA) is a uniform, disciplined, systematic approach to circuit analysis that determines whether each circuit and ... -
NACA-TR-534
Abstract: This report presents the results of wind tunnel tests of a wing in combination with each of three sizes of Fowler flap. The purpose of the investigation was to determine the aerodynamic characteristics as affected by flap ...Subject(s) : AERODYNAMIC , CHARACTERISTICS , CHORDS , COEFFICIENTS , DIMENSIONS , DOWNWASH , DRAG , FLAPS , GEOMETRY , LIFT , LOADS , LOCATION , MOMENTS , PITCHING , POSITION , RUNS , SIZE , TAKEOFF , WING , WINGS , -
NASA-LLIS-1514
Abstract: Abstract:
For the Chandra thermal-plasma environments interactions, the 1992 Program re-baseline removed two instruments, one of which required active thermal control. The orbit for Chandra was changed ...Subject(s) : Accident Investigation , Configuration Management , Environment , Extra-Vehicular Activity , Flight Equipment , Hardware , Mishap Reporting , NASA Standards , Parts Materials & Processes , Payloads , Policy & Planning , Program and Project Management , Risk Management/Assessment , Safety & Mission Assurance , Spacecraft , Standard , Test & Verification , -
JAN-N-412A
Abstract: This specification was approved by the Department of the Army, the Navy, and the Air Force for use of procurement services of the respective Departments. Intended Use: —Powdered nickel covered by this ... -
NASA-LLIS-6416
Abstract: This lessons learned addresses handling, fabrication, integration and test issues identified during the use of Gore SpaceWire cable, part number GSC-05-82730-00, size AWG26. This wire was used in flight hardware intended ...Subject(s) : Additional Categories.Communication Systems , Additional Categories.Flight Equipment , Additional Categories.Test & Verification , Additional Categories.Test Article , Manufacturing and Assembly , Safety and Mission Assurance.Product Assurance , Safety and Mission Assurance.Quality , Systems Engineering and Analysis.Engineering design and project processes and standards , -
SMD-5962-05241 REV B
Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ... -
DODD 7000.14-R VOL 6A CHAP 15
Abstract: Purpose
This chapter identifies the reporting requirements and provides guidance on the Defense Working Capital Fund (DWCF) Accounting Report [Accounting Report (Monthly) 1307] (AR(M) 1307). -
DODD 1430.02
Abstract: PURPOSE
This Instruction:
Reissues Reference (a) as a DoD Instruction according to the guidance in Reference (b) and the authority in Reference (c).
Establishes and implements policy and assigns ... -
MIL-R-83722/8
Abstract: The complete requirements for procuring the relay described herein shall consist of this document and the issue in effect of Specification MIL-R-83722 (USAF). -
MIL-PRF-49156B
Abstract: This specification covers the Eyepiece Assembly, part of the Night Vision Goggles, AN/PVS-5( ) (see 6.1). Intended Use: The eyepiece assembly is part of the AN/PVS-5( ) Night Vision Goggles, used for ...Subject(s) : Eyepiece adapter , Eyepiece assembly , Eyepiece cell assembly , -
MIL-V-24586A
Abstract: This specification covers the requirements of ¼-inch and ½-inch sized needle valves. Intended Use: Needle valves covered by this specification are intended for use for vent, drain, and fluid sampling ...