Defence Standards: Recent submissions

Now showing items 341-360 of 43216

    • A-A-59719 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2003
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This commercial item description (CID) covers a two-component polyurethane lining used in protecting profiled, cleaned and primed (when required) wood, concrete, rigid plastic, fiberglass, elastomeric plastic and metal ...
      Subject(s) : Abrasion protection , Chip resistant , Corrosion protection , Corrosion resistance , Impact protection , Sound emission , Stone pecking , Vibration absorption ,

    • A-A-59397 NOTICE 2 

      Type: standard
      Source: DLA - GS6 - DLA Aviation - Richmond:;2013
      Organization : DLA - GS6 - DLA Aviation - Richmond

    • COMDTINST 5400.20A 

      Type: standard
      Source: USCG - United States Coast Guard:;2004
      Organization : USCG - United States Coast Guard
      Abstract: PURPOSE.
      This Instruction establishes policy and procedures for the operation of the Work-Life staffs assigned to Coast Guard Headquarters, the Headquarters Support Command, and the regional Integrated Support ...

    • MIL-M-28787/363 CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • DSCC-VID-V62/12602 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance complete DDR, DDR2 and DDR3 memory power solution synchronous buck controller, 3-A LDO, buffered reference microcircuit, with an operating temperature ...

    • MIL-HDBK-817 

      Type: standard
      Source: NAVY - EC - Space and Naval Warfare Systems Command:;1994
      Organization : NAVY - EC - Space and Naval Warfare Systems Command
      Abstract: The U.S. Government is developing a large number of complex systems that are required to function during or after exposure to a radiation environment. The need for these systems to accomplish their designated mission ...

    • MIL-DTL-3628/34K 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1996
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • MIL-DTL-11589/521 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1999
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: Inactive for new design after 2 July 1999.
      This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described ...

    • JSSG-2011 VALID NOTICE 1 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2011
      Organization : NAVY - AS - Naval Air Systems Command

    • MIL-C-43827D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers one type and size of ammunition case, fabricated from Olive Green nylon duck, webbing and tape, with miscellaneous metallic hardware and plastic flap closure. Intended Use: The case ...
      Subject(s) : Belt , Grenade carrier , Individual equipment , Suspenders ,

    • MIL-DTL-3943/225A 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2012
      Organization : ARMY - IH - Institute of Heraldry

    • SMD-5962-98630 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1999
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...

    • MIL-P-21922B (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1974
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • DODD 1235.10(D) CE-01 

      Type: standard
      Source: DODD - DoD Directives Service:;2011
      Organization : DODD - DoD Directives Service
      Abstract: PURPOSE.
      This Directive:
      a. Reissues DoD Directive (DoDD) 1235.10 (Reference (a)) to update policy and responsibilities for mobilizing the Reserve Component (RC), to include appropriate guidance from Secretary ...

    • MIL-DTL-7793/10C 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2012
      Organization : NAVY - AS - Naval Air Systems Command

    • SMD-5962-92042 REV F 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2005
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...

    • MIL-C-17/176D VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2001
      Organization : DLA - CC - DLA Land and Maritime

    • MIL-DTL-11589/333C NOTICE 2 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2001
      Organization : ARMY - IH - Institute of Heraldry

    • A-A-50752A 

      Type: standard
      Source: DLA - GS1 - DLA Aviation - Richmond:;2001
      Organization : DLA - GS1 - DLA Aviation - Richmond
      Abstract: SCOPE. This commercial item description (CID) establishes government acquisition requirements for a penetrant test kit, which contains the components necessary for testing new and in-use penetrant materials to determine ...
      Subject(s) : bi-metal thermometer , contamination , degradation , filter paper , forceps , graduated mixing cylinder , hydrometer , radiometer , refractometer , stopper , test panel , water washing apparatus ,

    • MIL-PRF-27/329C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime