درباره ما
SAE - SAE International: Recent submissions
Now showing items 461-480 of 16264
-
Maintainability Recommendations for Aircraft Wheel and Hydraulically Actuated Brake Design
Abstract: This SAE Aerospace Recommended Practice (ARP) recommends the maintainability features which should be considered in the design of aircraft wheels and brakes. The effect on other factors, such as, cost, weight, reliability, ... -
Minimizing Stress-Corrosion Cracking in Wrought High-Strength Aluminum Alloy Products
Abstract: The purpose of this recommended practice is to provide the aerospace industry with recommendations concerning minimizing stress corrosion cracking (SCC) in wrought high strength aluminum alloy products. -
Environmental Degradation of Textiles
Abstract: Since cargo restraint devices made with textiles should have a predictable service life, there should be data available so that predictions can be made. This document compiles available information on textiles of the types ... -
Sleeve, Hose Assembly, Fire Protection
Abstract: This standard defines the requirements for bulk protective sleeve to provide fire resistance for aircraft hose assemblies, which will enable these assemblies to meet the requirements of AS1055.NOTE: Use of this sleeve does ... -
Process for Assessment and Mitigation of Early Wearout of Life-Limited Microcircuits
Abstract: This document is intended for use by designers, reliability engineers, and others associated with the design, production, and support of electronic sub-assemblies, assemblies, and equipment used in AADHP applications to ... -
Unmanned Systems Terminology Based on the ALFUS Framework
Abstract: This SAE Aerospace Recommended Practice (ARP) describes terminology specific to unmanned systems (UMSs) and definitions for those terms. It focuses only on terms used exclusively for the development, testing, and other ... -
Vacuum Gauge Calibration
Abstract: This SAE Aerospace Recommended Practice (ARP) addresses the general procedure for the best practices for minimizing uncertainty when calibrating thermal conductivity and cold cathode vacuum gauges, which includes the vacuum ... -
Recommended Practice Regarding Commercial Aircraft Hydraulic System External Leakage
Abstract: This Aerospace Recommended Practice (ARP) provides a comprehensive and consistent set of guidelines for the definition, recognition, troubleshooting and repair of hydraulic components and systems on in-service commercial ... -
Aircraft Tire Inspection - In-Service Removal Criteria
Abstract: This document is for establishing tire removal criteria of on-wing civil aircraft tires only. This document is primarily intended for use with commercial aircraft, but may be used on other categories of civil aircraft, as ... -
High Strength Elevated Temperature Bolting Practice
Abstract: This SAE Aerospace Recommended Practice (ARP) provides general information on the design and installation of threaded fasteners in high strength and high temperature applications in propulsion systems. Some of the more ... -
Touch Interactive Display Systems: Human Factors Considerations, System Design and Performance Guidelines
Abstract: This Aerospace Recommended Practice (ARP) addresses direct touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. Direct touch refers to interactivity where the display screen ... -
Safety Assessment of Transport Airplanes in Commercial Service
Abstract: This document describes guidelines, methods, and tools used to perform the ongoing safety assessment process for transport airplanes in commercial service (hereafter, termed “airplane”). The process described herein is ... -
Air Cargo Pallets - Utilization Guidelines
Abstract: Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements ... -
Landing Gear Shock Absorption Testing of Civil Aircraft
Abstract: The intent of this document is to provide recommended practices for conducting shock absorption testing of civil aircraft landing gear equipped with oleo-pneumatic shock absorbers. The primary focus is for Part 25 aircraft, ... -
Prestressing (Autofrettaging) of Hydraulic Tubing Lines
Abstract: This AIR is intended to describe and document a process presently in use for proof testing, which at the same time improves the fatigue life of 304 1/8 hard CRES and 3Al-2.5V CWSR titanium hydraulic tubing lines. -
Emergency Portability of Slide/Rafts
Abstract: This SAE Aerospace Recommended Practice (ARP) recommends design features for facilitating relocation of portable slide/rafts for deployment at an alternate exit under ditching conditions.