درباره ما
IEC TS 60034-25
English -- Rotating electrical machines – Part 25: AC electrical machines used in power drive systems – Application guide - Edition 3.0;
French -- Machines électriques tournantes – Partie 25: Machines électriques à courant alternatif utilisées dans les entraînements électriques de puissance – Guide d'application - Edition 3.0
Organization:
IEC - International Electrotechnical Commission
Year: 2014
Abstract: This part of IEC 60034 describes the performance characteristics of a.c. electrical machines for use on converter supplies. For electrical machines specifically designed for converter duty application design features are defined. It also specifies the interface parameters and interactions between the electrical machine and the converter including installation guidance as part of a power drive system, but except for the voltage at the power interface which is described in IEC 61800-8.
The general requirements of relevant parts of the IEC 60034 series of standards also apply to electrical machines within the scope of this technical specification.
For electrical machines operating in potentially explosive atmospheres, additional requirements as described in the IEC 60079 series or IEC 61241 series for dust ignition proof apply.
This technical specification is not primarily concerned with safety. However, some of its recommendations may have implications for safety, which should be considered as necessary.
Where a converter manufacturer provides specific installation recommendations, they should take precedence over the recommendations of this technical specification.
The general requirements of relevant parts of the IEC 60034 series of standards also apply to electrical machines within the scope of this technical specification.
For electrical machines operating in potentially explosive atmospheres, additional requirements as described in the IEC 60079 series or IEC 61241 series for dust ignition proof apply.
This technical specification is not primarily concerned with safety. However, some of its recommendations may have implications for safety, which should be considered as necessary.
Where a converter manufacturer provides specific installation recommendations, they should take precedence over the recommendations of this technical specification.
Collections
:
-
Statistics
IEC TS 60034-25
Show full item record
| contributor author | IEC - International Electrotechnical Commission | |
| date accessioned | 2017-09-04T16:46:32Z | |
| date available | 2017-09-04T16:46:32Z | |
| date copyright | 2014.10.01 | |
| date issued | 2014 | |
| identifier other | WCPTIFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=author:%22NAVY%20-%20YD%20-%20Naval%20Facilities%20Engineering%20Command%22/handle/yse/109816 | |
| description abstract | This part of IEC 60034 describes the performance characteristics of a.c. electrical machines for use on converter supplies. For electrical machines specifically designed for converter duty application design features are defined. It also specifies the interface parameters and interactions between the electrical machine and the converter including installation guidance as part of a power drive system, but except for the voltage at the power interface which is described in IEC 61800-8. The general requirements of relevant parts of the IEC 60034 series of standards also apply to electrical machines within the scope of this technical specification. For electrical machines operating in potentially explosive atmospheres, additional requirements as described in the IEC 60079 series or IEC 61241 series for dust ignition proof apply. This technical specification is not primarily concerned with safety. However, some of its recommendations may have implications for safety, which should be considered as necessary. Where a converter manufacturer provides specific installation recommendations, they should take precedence over the recommendations of this technical specification. | |
| language | English, French | |
| title | IEC TS 60034-25 | num |
| title | English -- Rotating electrical machines – Part 25: AC electrical machines used in power drive systems – Application guide - Edition 3.0 | en |
| title | French -- Machines électriques tournantes – Partie 25: Machines électriques à courant alternatif utilisées dans les entraînements électriques de puissance – Guide d'application - Edition 3.0 | other |
| type | standard | |
| page | 184 | |
| status | Active | |
| tree | IEC - International Electrotechnical Commission:;2014 | |
| contenttype | fulltext |