درباره ما
Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
ASTM D5795-16
Organization:
ASTM - ASTM International
Year: 2024
Abstract: 5.1 This test method provides a simple quantitative measure of water absorption by coated wood or wood based products. 5.2 This test method has demonstrated utility for wood or wood based products ranging in thickness from approximately 6 mm to 25 mm (1/4 in. to 1 in.). 5.3 Conditioning of substrate, coated sample preparation, application method, dry film thickness, cure conditions, and number of replicate specimens should be agreed upon between the purchaser and the supplier of the coating material. 5.4 Such measurements are used as indicators or predictors of the anticipated performance of coated wood or wood based products during exterior exposure. They may be used for developmental evaluation of coatings, substrates, or both. They may also be useful for quality control or monitoring of the production of coated wood and wood based products.
Collections
:
-
Statistics
Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2024-12-17T23:28:07Z | |
| date available | 2024-12-17T23:28:07Z | |
| date copyright | 2024 | |
| date issued | 2024 | |
| identifier other | D5795-16r24.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho1826AF67FCDC52736159DD6ED52F014A/handle/yse/337755 | |
| description abstract | 5.1 This test method provides a simple quantitative measure of water absorption by coated wood or wood based products. 5.2 This test method has demonstrated utility for wood or wood based products ranging in thickness from approximately 6 mm to 25 mm (1/4 in. to 1 in.). 5.3 Conditioning of substrate, coated sample preparation, application method, dry film thickness, cure conditions, and number of replicate specimens should be agreed upon between the purchaser and the supplier of the coating material. 5.4 Such measurements are used as indicators or predictors of the anticipated performance of coated wood or wood based products during exterior exposure. They may be used for developmental evaluation of coatings, substrates, or both. They may also be useful for quality control or monitoring of the production of coated wood and wood based products. | |
| language | English | |
| title | Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus | en |
| title | ASTM D5795-16 | num |
| type | standard | |
| page | 4 | |
| status | Active | |
| tree | ASTM - ASTM International:;2024 | |
| contenttype | fulltext | |
| scope | 1.1 This test method is intended to serve as a means for measurement of liquid water that passes through a wetted paint film, and which is subsequently absorbed and retained by the underlying wood or wood-based substrate. Alternative techniques for the use of the “Cobb Ring” apparatus are described. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/D5795-16R24 |