Show simple item record

English -- Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016);
German -- Widerstandsschweissen - Widerstandsschweisseinrichtungen - Mechanische und elektrische Anforderungen (ISO 669:2016)

contributor authorDIN - Deutsches Institut fš?r Normung e. V.
date accessioned2017-10-18T11:13:52Z
date available2017-10-18T11:13:52Z
date copyright2016.07.01
date issued2016
identifier otherEZKXQFAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;query=autho1826ear3081D20686159DD6EFDECAB6A0Facilities%177ngineering%20Command%226EFDEC9FCD/handle/yse/236850
description abstractScope: This International Standard defines and specifies certain identified electrical and mechanical characteristics of equipment used for — resistance spot welding, — projection welding, — resistance seam welding, — upset welding1), and — flash welding2). This International Standard specifies the information to be given in equipment specifications and the test methods to be used for measuring those characteristics. Not all requirements apply to all types of equipment. The following types of power sources are included: — single phase with alternating welding current; — single phase with rectified welding current by rectification of the output of the welding transformer; — single phase with inverter welding transformer; — three phase with rectified welding current by rectification of the output of the welding transformer; — three phase with a current rectification in the input of the welding transformer (sometimes called frequency convertor); — three phase with inverter welding transformers. This International Standard does not apply to welding transformers that are separate from the equipment. NOTE Safety requirements for resistance welding equipment are covered by IEC 62135–1. 1) Often referred to by the non-preferred term, butt welding. 2) Often referred to by the non-preferred term, flash butt welding.
languageEnglish
titleDIN EN ISO 669num
titleEnglish -- Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016)en
titleGerman -- Widerstandsschweissen - Widerstandsschweisseinrichtungen - Mechanische und elektrische Anforderungen (ISO 669:2016)other
typestandard
page47
statusActive
treeDIN - Deutsches Institut fš?r Normung e. V.:;2016
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record