Show simple item record

ARMOR PLATE, STEEL, WROUGHT, ULTRA-HIGH-HARDNESS

contributor authorARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
date accessioned2017-09-04T15:42:11Z
date available2017-09-04T15:42:11Z
date copyright07/24/2009
date issued2009
identifier otherPIYCNCAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std;query=autho4703177D081D20686159DD6EFDEC014A/handle/yse/44528
description abstractThis specification covers quenched or quenched and tempered ultra-high-hardness (UHA) wrought steel armor plate for lightweight armor applications for ordered thicknesses from 0.118 inches (3 mm) up to an ordered thickness of 0.630 inches (16 mm), inclusive (see 6.1, 6.2, and 6.3). Although the major intent of UHA is an armor appliqué, UHA could be utilized as a welded structural plate if welded by special techniques.Intended Use: The steel armor covered by this specification is intended for lightweight applications where resistance to ball and armor piercing types of ammunition and multiple hit capabilities are required. Although the major intent of UHA is an armor appliqué, UHA could be utilized as a welded structural plate if welded by special techniques. Because of the high carbon equivalence (CE) of the type of steel specified, it will be more difficult to weld than MIL-DTL-46100E.
languageEnglish
titleMIL-DTL-32332num
titleARMOR PLATE, STEEL, WROUGHT, ULTRA-HIGH-HARDNESSen
typestandard
page24
statusActive
treeARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2009
contenttypefulltext
subject keywordsBallistic testing
subject keywordsBatch tempering
subject keywordsContinuous tempering
subject keywordsHeat treated
subject keywordsLightweight material


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record