درباره ما
ACI - American Concrete Institute: Recent submissions
Now showing items 141-160 of 636
-
-
ACI 325.14R
Abstract: General This document is intended to be used as a supplement to ACI 211.1, specifically for paving concrete mixtures. ACI 211.1 provides an in-depth discussion of concrete mixture characteristics and technology. It is ... -
ACI SP-319
Abstract: Preface Fiber reinforcement is the most effective way of improving the resistance of concrete to cracking, but little is known of the extent of the reduction of crack width with fiber. The papers included in this special ... -
ACI 332.1R
Abstract: This guide provides practical information about the construction of residential concrete that meets or exceeds code requirements, covering all concrete work within the scope defined in the “International Residential ... -
ACI SP-317
Abstract: Preface The papers presented in this volume were included in a three-part session sponsored by ACI Committee 201, Durability of Concrete, about sulfate attack on concrete at the ACI Convention in Philadelphia, PA, on October ... -
ACI 304.2R
Abstract: This guide for concrete pumping discusses equipment use, proper mixtures for good pumpability, and field practices. References cited provide more detailed information on specific subjects. This guide does not address ... -
ACI 364.17T
Abstract: Introduction A review of published literature indicates that there is plenty of information regarding the pH of concrete as it relates to carbonation, embedded steel corrosion, alkali-silica reaction, and effects of mineral ... -
ACI 351.3R
Abstract: This document is limited in scope to the engineering, construction, repair, and upgrade of concrete foundations for dynamic equipment. For the purposes of this document, dynamic equipment includes the following: a) Rotating ... -
ACI 347.2R
Abstract: Although the aforementioned documents provide basic guidelines for general formwork operations, there are no codes or standards that provide detailed design and construction requirements specifically for shoring/reshoring ... -
ACI 423.3R
Abstract: Recommendations pertinent to design with single-strand unbonded tendons considered in this report include the design of slabs, beams, and continuous members; details and properties of tendons and anchors; and protection ... -
ACI 233R
Abstract: Scope and objective The objective of this report is to compile and to present experiences in research and field use of slag cement in concrete and mortar, and to offer guidance in its specification, proportioning, and use. ... -
-
ACI SP-314
Abstract: Preface With increasing world population and urbanization, the depletion of natural resources and generation of waste materials is becoming a considerable challenge. As the number of humans has exceeded 7 billion people, ... -
-
ACI SP-316
Abstract: Preface Soil-structure interaction has been of interest over several decades; however, many challenging issues remain. Because all structural systems are founded on soil strata, transient and long-term foundation displacements, ... -
ACI 544.2R
Abstract: This report applies to the measurement of fresh state and fiber-dispersion properties of both conventionally mixed and placed (vibrated) FRC and fiber-reinforced self-consolidating concrete (FR-SCC) using steel, glass, ... -
ACI 131.2R
Abstract: This guide is intended to be used in conjunction with IFC 2x4 (IFC4), Addendum 1 (buildingSMART International 2015). This guide provides human-readable description of entities, attributes, property sets, and relationships ... -
ACI 549R
Abstract: This report includes the history, development, and applications of ferrocement together with composition and construction. Appendix A of this report provides several case studies of ferrocement applications. -
ACI 364.14T
Abstract: Introduction This document describes a method for determining the section loss (Fig. 1) of deformed and square, uncoated, round, reinforcing steel bars due to damage, corrosion, or both. A similar procedure can be used to ... -
ACI 369.1M
Abstract: This standard sets forth requirements for the seismic evaluation and retrofit of concrete components of the seismicforce- resisting system of an existing building. These building standard requirements apply to existing ...