MIL-PRF-6799L

Abstract

This specification establishes the performance requirements for water emulsion, protective, strippable, sprayable, coatings for application over metallic, painted, and plastic surfaces.<b><u>Intended Use:</u></b> These coatings are for use exclusively in military applications to cover military aircraft for long term storage in a desert environment and for transport in extreme seagoing environments not encountered by commercial aircraft. They are intended for use as follows: <u>a. Type II, class 1 and 1A, black</u>. This material is intended for use as (1) a strippable, protective coating for acrylic plastic bulk materials and assemblies containing acrylic plastics when the protected item is shipped fully covered or stored under cover, and (2) as a basecoat for type II, class 5 and class 6 and 6A materials. <u>b. Type II, class 5, white or olive drab</u>. This material is intended to be used only as a topcoating for type II, class 1 material. In combination, this protective coating system serves as a sprayable, strippable, protective coating for application on metallic, painted and plastic surfaces, such as entire aircraft, missiles, rockets, and transportation vehicles during outdoor storage and overseas deck loaded shipments. For Army use, the color should conform to FED-STD-595, Color No. 24084. <u>c. Type II, class 6 and 6A, white</u>. This material is intended to be used only as a topcoating for type II, class 1 material. In combination this protective system serves as a sprayable, strippable, protective coating for applications on metallic, painted, and plastic surfaces, such as entire aircraft, missiles, rockets, and transportation vehicles during outdoor storage and overseas deck loaded shipments. It is recommended for use with Binks Model No. 18 or DeVilbiss MBC spray gun. <u>d. Type II, class 7</u>. This material is intended as a brushable coating for patching or repairing damaged class 5 or class 6 coatings.<br>