AIA/NAS NAS1730

FASTENER, TAPER SHANK - Rev 3

contributor author	AIA/NAS - Aerospace Industries Association of America Inc.
date accessioned	2017-09-04T17:18:13Z
date available	2017-09-04T17:18:13Z
date copyright	41243
date issued	2012
identifier other	ZKIABFAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho47037D8369B749A961598F1EFDEC9FCD/handle/yse/141566
description abstract	Purpose. This specification establishes the requirements for procurements of taper shank threaded fasteners. These taper shank fasteners are products of licensed manufacturers. Classification. The fasteners covered by this specification shall be the type, size and material designated by the part number specified on the applicable NAS standard. Type I – 100º Countersunk Head Pin (NAS1724, NAS1725) Type II – Protruding Head Pin (NAS1728, NAS1729) Unless otherwise specified, part inventory manufactured to previous revisions of the applicable standard or drawing and this specification may be procured and used until stock is depleted.Intended Use: This specification is intended to establish and control the material and design requirements and the quality assurance provisions for the production of a taper shank bolt. This bolt is suitable for structural use in aerospace structures, military equipment and other applicable installations.
language	English
title	AIA/NAS NAS1730	num
title	FASTENER, TAPER SHANK - Rev 3	en
type	standard
page	28
status	Active
tree	AIA/NAS - Aerospace Industries Association of America Inc.:;2012
contenttype	fulltext