درباره ما
TIA - Telecommunications Industry Association: Recent submissions
Now showing items 381-400 of 1186
-
TIA TIA/EIA-690
Abstract: These standards detail definitions, methods of measurement, and minimum performance characteristics of 800-MHz Cellular Subscriber Units. These standards share the purpose of the Cellular System Mobile Station - Land Station ... -
TIA TIA-1194
Abstract: This Standard applies to premises equipment that is connected to one or more metallic conductive communication line(s) and either a DC power source, or a 120/240 V single phase AC power service with the neutral grounded ... -
TIA TIA-492AAAA-B
Abstract: This Detail Specification applies to class Ia, graded-index, 62.5/125 μm multimode optical fiber used as a component in the manufacture of fiber-optic cable used in buildings.
Applications include, but are not ...Subject(s) : detail specification , multimode , -
TIA TIA-904
Abstract: This document applies to earth terminals intended for non-Government use in blanket-licensed Ka-band satellite networks within the United States of America. It also applies to geostationary space station transmissions used ... -
TIA TIA-1204
Abstract: Scope of This Document
This Standard defines the band classes of the Terrestrial Mobile Multimedia Multicast Forward Link Only interface standard for 1 and 3, It also defines methods of measurement and ... -
TIA TIA-571-B
Abstract: This document establishes environmental performance criteria for Customer Premises Equipment (CPE), such as Telephones, Modems, Multi-line systems, Routers, Set top Boxes, Alarm Systems, etc. It defines the physical and ... -
TIA TSB-92-A
Abstract: This TSB establishes and documents methods and procedures of evaluation to establish compliance of fixed station cabinet emission levels with respect to the Federal Communications Commission (FCC) electromagnetic exposure ... -
TIA TIA-102.BBAC
Abstract: This clause defines the scope of this standard and provides related information including normative and informative references and a glossary of terms.
Scope of the Standard
The reference point for ... -
TIA TSB-88.3-C-1
Abstract: TIA TSB-88.3-C inaccurately defined the value of p in Equation (2) of sub clause 5.2.1 as the Target Service/Covered Area Reliability. This Addendum provides the corrected definition, Predicted Area Reliability, and includes ... -
TIA TSB-155-A
Abstract: PURPOSE AND SCOPE
This TSB describes additional guidelines to support the IEEE 802.3an 10GBASE-T standard using installed 100 Ω, 4-pair category 6 cabling meeting the requirements of ANSI/TIA-568-C.2. ... -
TIA TSB-150
Abstract: To recommend uniform format guidelines that can be used in the preparation of test reports submitted to the Federal Communications Commission and other relevant regulatory agencies, where such portable two-way radio equipment ... -
TIA TIA-1072
Abstract: The scope of this document is to define electronic surveillance capabilities required to support LAES and the interfaces between the SP and an LEA to assist the LEA in conducting LAES in a cdma2000® network providing ... -
TIA TIA-168-B
Abstract: This Standard specifies the labeling requirements for terminal equipment approved by a Telecommunications Certification Body or a Supplier's Declaration of Conformity for connection to the telephone network in accordance ... -
TIA TIA-526-11
Abstract: The intent of this test procedure is to measure the power penalty due to a single-reflection point reflecting optical power back into the laser transmitter of the single-mode digital fiber optical terminal equipment under test. -
TIA TSB62-13
Abstract: This procedure is appropriate for coated and uncoated fibers, but is not appropriate for jacketed or "tight buffered" fibers. It measures the strength and the stress corrosion parameters of optical fiber at specified ... -
TIA TIA-604-5-D
Abstract: FOCIS 5 presents the intermateability standard for connectors with the commercial designation of MPO, and is used as an addendum to TIA/EIA-604, Fiber Optic Connector Intermateability Standards. The provisions of ... -
TIA TSB-177-A
Abstract: This document provides voluntary guidelines for creating a consistent labeling method to indicate product compliance with TIA standards for user premises equipment. -
TIA TIA-568-C.0
Abstract: This Standard specifies requirements for generic telecommunications cabling. It specifies requirements for cabling system structure, topologies and distances, installation, performance and testing.
NOTE The diversity ... -
TIA TIA-1178
Abstract: INTRODUCTION AND SCOPE
This document specifies the functions and structure of the System Information (SI) associated with realtime and non-realtime broadcast and multicast services in Mobile ... -
TIA TIA-930
Abstract: Introduction
This standard specifies the necessary interfaces to support the bearer traffic between Media Gateways in the initial step of the Legacy Mobile Station Domain (LMSD). The requirements for ...