Now showing items 421-440 of 1186

    • TIA TIA-847-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2009
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      This document presents a recommended plan for the implementation of Roamer Database Verification (RDV) for use in the Wireless Radiotelephone Service.
      Several types of network entities ...
    • TIA TIA-455-185 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2008
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      The intent of this procedure is to assure that the coupling mechanism of a connector set or connector-device combination will withstand the axial loads likely to be applied during normal service.
    • TIA J-STD-102A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: Scope & Purpose
      The scope of this Supplement is J-STD-102.
      The purpose of this Supplement is to provide the errata and clarifications to the Joint ATIS/TIA CMAS Federal Alert Gateway to CMSP ...
    • TIA TIA-455-128 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2007
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      Intent
      Although light emission can occur as soon as current is applied to the semiconductor laser, it does nor emit coherent light until the current exceeds a critical ...
    • TIA TIA-1070 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2006
      Organization : TIA - Telecommunications Industry Association
      Abstract: High Rate Packet Data (HRPD) network access authentication is described in [1] and [2]. This document provides alternative procedures that allow a properly configured Hybrid mobile station / Access Terminal (HAT) to use ...
    • TIA TIA-455-220-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2003
      Organization : TIA - Telecommunications Industry Association
      Abstract: This standard applies only to multimode, graded-index glass-core glass-clad fibers (material class Ia, as listed in TIA/EIA-4920000-B)
      Note: This test method is commonly used in production and research facilities and ...
    • TIA TIA-1035-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: This specification defines air interface signaling conformance tests for CDMA mobile stations. It is applicable to P_REV_IN_USE equal to or less than twelve. In this document, ‘mobile station' refers to a subscriber ...
    • TIA TIA-559 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      This document describes a methodology that is recommended for engineering a single-mode fiber optic transmission system. The methods address the design of a regenerator section in which the ...
    • TIA TIA-455-131 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: This measurement is for optical fiber ribbons.
    • TIA TIA-329.1-D 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: The test conditions, and methods of measurement of base or fixed station antennas in the Land-Mobile Services are presented for establishing conformance to the performance requirements. The supplementary terms and definitions ...
    • TIA TIA-607-B-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: This addendum specifies additional design and testing requirements for a telecommunications grounding electrode system.
      Purpose
      The purpose of this Addendum is to provide additional design and ...
    • TIA TSB-102.CBBJ-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Bulletin identifies the tests appropriate for use in compliance-assessment-type testing in the area of Trunked Voice Interoperability. These tests were deemed appropriate by the members of TR-8.25. This group, being ...
    • TIA TIA-1122-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      This specification includes recommendations for VoIP codecs as well as protocol configuration to enable efficient support of VoIP over HRPD Rev A and HRPD Rev B. VoIP codecs are chosen ...
    • TIA TIA-102.BAJD 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document assigns TCP/UDP port numbers to P25 applications, and reserves a range of the IANA dynamic/private port numbers for assignment to future P25 applications.
    • TIA TIA/EIA-732-400 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      This Part summarizes the protocols used across the CDPD Airlink. Details of these protocols may be found in Part 401 through Part 409, which follow.
      Communications between the Mobile ...
    • TIA TSB-102.BADA-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document gives an overview of telephone voice interconnect for Land Mobile Radio (LMR) systems. The representative functional network model given in Figure 1 of this document describes a telephone interconnect interface ...
    • TIA TSB-159 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: To recommend uniform format guidelines that can be used in the preparation of test reports submitted to the FCC and other relevant regulatory agencies, where such mobile two-way radio equipment test reports are intended ...
    • TIA TIA-1066 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: The scope of this Standard is to define the electronic surveillance capabilities to support LAES on the interfaces between a SP and a LEA to assist the LEA in conducting electronic surveillance for cdma2000 VoIP service ...
    • TIA TIA-2000.5-F 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Specification provides the Layer 3 Upper Layer signaling protocol architecture and  functionality. Other specifications are required to complete the air interface and the rest of  the system. Some of these ...
    • TIA TIA-526-10 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2008
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      This document provides test procedures to measure the dispersion power penalty in a single-mode optical fiber communications system. The power penalty is measured using the maximum dispersion ...