درباره ما
IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions
Now showing items 381-400 of 2683
-
IEEE Standard Definitions for Excitation Systems for Synchronous Machines - Redline
Abstract: Defined in this standard are elements and commonly used components in excitation systems. Also contained are definitions for excitation systems applied to synchronous machines. An included annex contains one-line block ...Subject(s) : excitation control systems , synchronous generator controls , excitation systems terminology , 421.1 , definitions of excitation controls , excitation block diagrams , -
IEEE Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear Facilities - Redline
Abstract: The application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this guide.Subject(s) : nuclear facilities , human factors , computerized procedures , IEEE 1786 , -
IEEE Guide for Automatic Reclosing on AC Distribution and Transmission Lines - Redline
Abstract: Accepted industry practices for application of automatic reclosing on transmission and distribution lines are documented in this guide. The guide discusses fundamentals of automatic reclosing, application considerations, ...Subject(s) : sync check supervision , autoreclosing , automatic line sectionalizer , autoreclose blocking , autoreclose supervision , dead time , automatic reclosing , high-speed autoreclosing , IEEE C37.104™ , leader-follower autoreclosing , reclosing , fuse blowing scheme , time delayed autoreclosing , voltage supervision , sync check , fuse saving scheme , -
IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations and Other Nuclear Facilities - Redline
Abstract: The minimum acceptable requirements for the performance of reliability analyses for safety systems when used to address the reliability considerations discussed in industry standards and guidelines are set forth in this ...Subject(s) : nuclear facilities , safety systems , IEEE 577 , reliability analysis , -
IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines - Redline
Abstract: A procedure is established for the presentation of thermal limit curves, and guidance for the interpretation and use of these curves for machine thermal protection is provided in this guide.Subject(s) : machine thermal protection , three-phase squirrel cage induction machines , IEEE 620 , rotor cage windings , stator cage windings , thermal limit curves , -
Comparative Analysis: Existing Digital Health Standards, Guidelines, and Toolkits for Pandemic Response
Abstract: This report highlights the urgent need for a holistic approach that considers all aspects of the digital health ecosystem, and the importance of multidisciplinary and multilevel (local to global) collaborations to strengthen ...Subject(s) : digital resilience , white paper , digital health , global health , digital technology , -
IEEE Standard Telephone Loop Performance Characteristics - Redline
Abstract: Common denominators for subscriber line performance, independent of facility types, construction processes or equipment, and circuit provisioning methods are provided in this standard.Subject(s) : IEEE 820 , telephone loop , performance classifications , performance characteristics , -
American National Standard Performance Criteria for Active Interrogation Systems Used for Homeland Security - Redline
Abstract: The minimum performance criteria for active interrogation systems in homeland security applications are described in this standard. These systems are intended for non-intrusive inspection of closed containers, vehicles, ...Subject(s) : weapons of mass destruction , detection , homeland security , WMD , high-energy x-rays , identification , SNM , chemical warfare agents , neutrons , explosives , special nuclear materials , gamma-rays , baggage , ANSI N42.41 , active interrogation , cargo , -
IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems - Redline
Abstract: Covered in this standard are all liquid-immersed distribution, power, and regulating transformers that are designed to operate at temperatures that exceed the normal thermal limits of IEEE C57.12.00 under continuous load, ...Subject(s) : high-temperature , hybrid , conventional , insulation system , IEEE C57.154 , -
American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
Abstract: Minimum performance requirements and performance testing requirements are specified in this standard for instruments designed to measure radon progeny in air. Inasmuch as the health effects of exposure to radon progeny, ...Subject(s) : radon progeny , ANSI N42.50 , air monitoring , air sampling , radiological characterization , -
IEEE Standard for Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations - Redline
Abstract: Criteria that establish protection requirements for Class 1E power systems and equipment are prescribed in this standard. The purpose of and the means for obtaining protection from electrical and mechanical damage, or ...Subject(s) : nuclear power generating stations , Class 1E , electrical equipment , protection , power systems , IEEE 741 , -
IEEE Standard for Harmonic Control in Electric Power Systems - Redline
Abstract: Goals for the design of electrical systems that include both linear and nonlinear loads are established in this standard. The voltage and current waveforms that may exist throughout the system are described, and waveform ...Subject(s) : steady-state , harmonics , IEEE 519 , power quality , -
IEEE/ISO/IEC International Standard - Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 3: Standard for Ethernet AMENDMENT 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s op
Abstract: This amendment to IEEE Std 802.3-2018 adds Physical Layer specifications and management parameters for 10 Gb/s, 25 Gb/s, and 50 Gb/s Ethernet optical interfaces for bidirectional operation over a single strand of single-mode ...Subject(s) : 10GBASE-BR10 , 50GBASE-BR10 , 50GBASE-BR20 , 25GBASE-BR20 , bidirectional (BiDi) , 10GBASE-BR20 , 25GBASE-BR10 , forward error correction (FEC) , IEEE 802.3 , Ethernet , 25GBASE-BR40 , 10GBASE-BR40 , Physical Coding Sublayer (PCS) , Physical Medium Attachment (PMA) sublayer , Physical Medium Dependent (PMD) sublayer , multi-gigabit Ethernet bidirectional Physical Layers , IEEE 802.3cp , 50GBASE-BR40 , -
IEEE/ISO/IEC International Standard -Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 3: Standard for Ethernet AMENDMENT 13: Physical layers and management parameters for 1
Abstract: This amendment includes changes to IEEE Std 802.3-2018 and adds Clause 152 through Clause 154 and Annex 154A. This amendment adds 100 Gb/s Physical Layer specifications and management parameters for operation over DWDM ...Subject(s) : IEEE 802.3ct , single-mode fiber (SMF) , dense wavelength division multiplexing (DWDM) , DP-DQPSK , Energy-Efficient Ethernet (EEE) , IEEE 802.3 , forward error correction (FEC) , 100 Gb/s Ethernet , 100GBASE-ZR , Ethernet , Physical Medium Dependent (PMD) sublayer , DWDM black link , -
American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
Abstract: The minimum performance criteria for portable radiation protection instrumentation are established in this standard for use in ionizing radiation fields under both normal and extreme environmental conditions, i.e., all ...Subject(s) : handheld , detection , instrumentation , ANSI N42.17AC , health physics , normal conditions , radiation , extreme conditions , dose rate , performance , survey , test methods , portable , -
IISO/IEC/IEEE International Standard - Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 3: Standard for Ethernet AMENDMENT 12: Maintenance #15: Power over Ethernet
Abstract: This amendment implements editorial and technical corrections, refinements, and clarifications to Clause 145, Power over Ethernet, and related portions of the standard. No new features are added by this amendment.Subject(s) : Power over Ethernet , IEEE 802.3 , DTE power via MDI , PoE , amendment , Ethernet , IEEE 802.3bt , -
IEEE Standard - Health informatics -- Device interoperability -- Part 10206: Personal health device communication -- Abstract Content Information Model
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, a simplified framework for making an abstract model of personal health data is available in this standard. The specification addresses ...Subject(s) : IEEE 11073-10206 , device interoperability , personal health device communication , -
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture
Abstract: Circuitry that may be added to an integrated circuit to provide access to on-chip Test Access Ports (TAPs) specified by IEEE Std 1149.1 is described in this standard. The circuitry uses IEEE Std 1149.1 as its foundation, ...Subject(s) : TDOC , Class T0 , SScan1 , EXTEST , Transport Packet , scan format , scan IR , ZBS , IEEE 1149.7 , CP , T1 TAP.7 , test and debug , BSDL.1 , scan DR , Series Scan Topology , Star-4 , SP , DTI , DTT , Chip-Level TAP Controller , Series Topology , DOT1 , Scan Topology , debug logic , debug and test interface , nTRST_PD , TAP.7 , PC0 , Series Branch , compliant operation , TCKC , Star Scan , Class T4 , OScan1 , Scan Selection Directive , TAP.1 , nTRST , RSU , Debug Test System , STL , SScan2 , Class T5 , background data transport , HSDL.7 , RTI , Test-Logic-Reset , SiP , Pause-DR , Standard Protocol , Advanced Protocol , System Test Logic , Background Data Transfer , JScan , Star Scan Topology , TAP , Instruction Register , OScan3 , 4-pin , scan protocol , scan performance , extended operation , debug test target , series , Test Access Port , TP , OScan2 , Class T2 , SScan0 , boundary scan , SScan , Custom Data Transfer , T5(W) TAP.7 , Run- Test/Idle , EOT , Series Scan , zero bit scan , OScan , BYPASS , Class T1 , BSDL , Controller Identification Number , scan , Star- 4 Scan , T3 , Star-4 Scan Topology , SSD , T0 TAP.7 , TLR , JScan0 , TAPC , T5(W) , two-wire , optimized scan , OScan0 , OScan5 , Capture-IR , DTS , HSDL , Controller ID , Star Topology , MTCP , Star-2 Scan , narrow Star Scan Topology , TAP controller address , CDX , scan path , Class T3 , DOT7 , MScan , PC1 , control level , TDOE , 2-pin , controller address , Star-4 Branch , Scan Packet , OScan6 , star scan , Series- Equivalent Scan , Shift-IR , two-pin , TMSC , T2 TAP.7 , T5 , JTAG , T3 TAP.7 , T4(N) TAP.7 , compliant behavior , Update-DR , IDCODE , EPU , four-wire , IEEE 1149.1 , custom data transport , Update-IR , TCK , T0 , T4(W) , Data Register , JScan2 , OScan7 , stall , JScan3 , scan topology , debug interface , Advanced Protocol Unit , Star-2 , T2 , T4(N) , Reset and selection unit , TDIC , Multi-TAP Control Path , T4 , TDI , BSDL.7 , 2-wire , T5(N) , APU , four-pin , Extended Protocol , BDX , TAP selection , Escape , CLTAPC , CID , Shift-DR , compact JTAG , Star-2 Branch , JScan1 , TAP controller , SScan3 , OScan4 , T1 , T4(W) TAP.7 , T5(N) TAP.7 , T5 TAP.7 , TCA , Pause-IR , 4-wire , T4 TAP.7 , -
IEEE Recommended Practice for Distributed Simulation Engineering and Execution Process (DSEEP
Abstract: The recommended practice for Distributed Simulation Engineering and Execution Process (DSEEP) is described in this document. The DSEEP is intended as a high-level process framework into which the lower-level systems ...Subject(s) : high level architecture (HLA) , modeling and simulation , Test and Training Enabling Architecture (TENA) , engineering methodology , distributed simulation , IEEE 1730 , Distributed Interactive Simulation (DIS) , M&S , system process , -
IEEE Guide for Load Modeling and Simulations for Power Systems
Abstract: Load modeling plays an important role in power system modeling, and the load model is an indispensable component in power system simulation. To get accurate load models and formulate a unified document, this guide has been ...Subject(s) : power system simulations , static load model , active distribution network , measurement-based approach , dynamic load model , microgrids , simulation , IEEE 2781 , load modeling , component-based approach ,