MSS SP-98

Protective Coatings for the Interior of Valves, Hydrants, and Fittings

contributor author	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.
date accessioned	2017-09-04T15:28:01Z
date available	2017-09-04T15:28:01Z
date copyright	01/01/2012
date issued	2012
identifier other	NTCUUEAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho47037D83FCDCAC4261598F1EFDEC014A/handle/yse/29018
description abstract	This Standard Practice covers the material, application, and performance requirements for liquid or powder interior coatings for valves, hydrants, and fittings. In addition, this Standard Practice covers equipment used to conduct holiday tests on coatings. These coatings are applied to interior ferrous surfaces of valves, hydrants, and fittings intended for use in water, drinking water, or sewerage systems where corrosion protection is specified. Where it is necessary, because of the application process or purchase requirements, the coating may also be specified for exterior use, with recognition that performance parameters may vary from those specified for interior use. This Standard Practice does not cover the following: Special coatings agreed to by the purchaser and the manufacturer. Coatings for special service conditions such as salt water, acid, high temperature, etc
language	English
title	MSS SP-98	num
title	Protective Coatings for the Interior of Valves, Hydrants, and Fittings	en
type	standard
page	10
status	Active
tree	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.:;2012
contenttype	fulltext