TAPPI - TAPPI: Recent submissions

Now showing items 181-200 of 533

    • TAPPI T 622 CM 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: The method describes the procedure for determining the percentage of active chemicals in sodium hydrosulfite (Na2S2O4) products.
      Subject(s) : Sodium hydrosulfite ,

    • TAPPI TIP 0606-20 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI

    • TAPPI T 556 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: This procedure is used to measure the bending resistance of paper and paperboard in the machine and cross machine directions, by determining the bending resistance in mN of a 38 mm (1.5 in.) wide vertically clamped sample, ...
      Subject(s) : Bend strength , Paper , Paperboard , Stiffness ,

    • TAPPI TIP 0404-61 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: This TIP outlines basic considerations for the application of showers on paper machines, and specific recommendations for showers to clean and condition forming and press fabrics. Dryer fabric cleaning is discussed in TIP ...
      Subject(s) : Cleaning , Flow , Forming , Nozzles , Pressing , Showers ,

    • TAPPI T 831 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0416-07 

      Type: standard
      Source: TAPPI - TAPPI:;2006
      Organization : TAPPI - TAPPI

    • TAPPI T 547 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This method is used to measure the air permeance of a circular area of paper using a pressure differential of approximately 10 kPa (1.5 psig). In order to accommodate a wide range of paper products, rubber clamping plates ...

    • TAPPI T531 CM 

      Type: standard
      Source: TAPPI - TAPPI:;2001
      Organization : TAPPI - TAPPI

    • TAPPI T 227 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI T 558 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: This test method measures the contact angle of a test liquid in contact with a film or a paper substrate under specified test conditions. This test method may be used with any liquid of interest which is compatible with ...
      Subject(s) : Absorptivity , Adhesion , Adsorption , Contact angle , Paper , Paperboard , Printing , Wettability , Wetting ,

    • TAPPI T 566 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0305-38 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0106-01 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0410-10 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Subject(s) : Flow measurement , Flumes , Weirs , White water ,

    • TAPPI UM 542 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: This method is suitable for the ordinary types of mineral coatings. It may not be effective for special types, such as where lacquers or other materials are used to impart a high degree of water resistance. It is not ...
      Subject(s) : Coated papers , Coating , Minerals , Paper ,

    • TAPPI TIP 0404-02 

      Type: standard
      Source: TAPPI - TAPPI:;2005
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0502-03 

      Type: standard
      Source: TAPPI - TAPPI:;2006
      Organization : TAPPI - TAPPI

    • TAPPI T 610 SP 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: This method describes preparation of frequently used indicator solutions and preparation and standardization of frequently used volumetric reagent solutions (usually called "standard solutions") required in TAPPI Test Methods.
      Subject(s) : Ammonium thiocyanate , Ferrous ammonium sulfate , Hydrochloric acid , Indicators , Iodine , Potassium dichromate , Potassium hydroxide , Potassium permanganate , Potassium thiocyanate , Reagents , Silver nitrate , Sodium hydroxide , Sodium thiosulfate , Standard solutions , Sulfuric acid ,

    • TAPPI TIP 0416-03 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: High paper mill boiler operating steam pressures require careful examination of water quality control limits and monitoring procedures to assure maximum system reliability. The guidelines applicable to water treatment ...
      Subject(s) : Alkalinity , Analysis , Blowing , Boilers , Condensates , Conductivity , Copper , Deaerators , Dissolved oxygen , Economizers , Feedwater , Iron , pH , Phosphates , Relief , Sampling , Silica , Sodium , Specifications , Steam , Temperature , Test facilities , Water hardness ,

    • TAPPI TIP 0607-06 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI