TAPPI T 556 OM

Bending resistance of paper and paperboard by single-point bending method

contributor author	TAPPI - TAPPI
date accessioned	2017-09-04T17:27:44Z
date available	2017-09-04T17:27:44Z
date copyright	2011.01.01
date issued	2011
identifier other	CNTCOEAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho47037D83FCDCAC426159DD6E273C9FCD/handle/yse/150867
description abstract	This procedure is used to measure the bending resistance of paper and paperboard in the machine and cross machine directions, by determining the bending resistance in mN of a 38 mm (1.5 in.) wide vertically clamped sample, at 15° or 7.5° deflection. For this method the standard bending angle is 15 ± 0.1°. For specimens that break or are otherwise unsuitable at 15° a bending angle of 7.5 ± 0.1° shall be used.
language	English
title	TAPPI T 556 OM	num
title	Bending resistance of paper and paperboard by single-point bending method	en
type	standard
page	5
status	Active
tree	TAPPI - TAPPI:;2011
contenttype	fulltext
subject keywords	Bend strength
subject keywords	Paper
subject keywords	Paperboard
subject keywords	Stiffness