CSA A277-16

Abstract

This Standard specifies the procedure for certification of prefabricated buildings, and partially or fully enclosed modules and panels for buildings of any occupancy. <br>It provides requirements for <br>a) certification of the factory quality program; <br>b) certification of the prefabricated product; <br>c) auditing of the factory quality program; and <br>d) in-factory inspection of the prefabricated product. <br><strong>Notes</strong>: <br>1) <em>This Standard applies to prefabricated buildings, modules, and panels constructed of any material. (See Annex A.)</em> <br><em>2) This Standard applies to buildings of any occupancy. Use is limited only by certification listing for the manufacturer and the capabilities of the certification body. (See Annex A.)&#160;</em> <br>This Standard does not cover portions of buildings or services that are not completed in the factory. It also does not address the transport of buildings or their erection at the building site, except as provided in Clause 7.5.1. <br><strong>Note</strong>: <em>Prefabricated buildings, modules, and panels should be designed to resist or accommodate loads and stresses imposed in transit and during placement. Loads and stresses imposed in transit will depend in part on the methods of transportation accepted by the transportation authority.&#160;</em> <br>In this Standard, &#8220;shall&#8221; is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; &#8220;should&#8221; is used to express a recommendation or that which is advised but not required; and &#8220;may&#8221; is used to express an option or that which is permissible within the limits of the Standard.