ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 341-360 of 832
-
MIL-STD-3003B
Abstract: This standard covers practices to protect wheeled vehicles against environmentally induced corrosion and deterioration and other forms of degradation during storage and shipment associated with the military distribution ... -
A-A-59157 VALID NOTICE 1
Abstract: This CID covers wheel rings for pneumatic tire wheels for wheeled tactical vehicles. -
A-A-52479
Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MS53037E, which is canceled. -
MIL-STD-3049
Abstract: Purpose. This standard defines the requirements for material selection, qualification, and inspection of components that will be repaired by Direct Deposition of Metal (DDM) of a metallic feedstock to a metallic ... -
-
MIL-PRF-21260E
Abstract: This performance specification covers engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types, and of power ...Subject(s) : Combat service , Compression-ignition , Corrosion inhibitor , Foaming , Power transmission fluid , Spark-ignition , Tactical service , Viscosity , -
MIL-HDBK-1271 VALID NOTICE 1
Abstract: This standard specifies symbols to be shown on military vehicle instruction plates in addition to the text. Controls, indicators and tell-tales of a road vehicle are provided with symbols to ensure their identification and ... -
MIL-PRF-32215A
Abstract: This specification establishes, unless otherwise specified, the minimum requirements for engineering acceptance for the operation, performance, and reliability of Exterior Lighting Devices (LED), for military vehicles, ...Subject(s) : Water submersion test , -
MIL-DTL-45334E
Abstract: This specification covers eight types of air compressors for airbrake systems of military wheeled vehicles. This specification also covers accessory governors and air cleaners for type I and type II compressors (see ...Subject(s) : Air cooled , Air flow restrictions , Power input , Pressure buildup time , Pressure setting , Water cooled , -
A-A-52015A
Abstract: This description covers spring-loaded, independently operating, reel type taglines capable of maintaining constant tension on a clamshell bucket or other types of crane loads to prevent rotation while the load is suspended freely.Subject(s) : Clamshell Bucket , Constant Tension , Load Stability , -
MIL-PRF-12386F
Abstract: This specification covers two types of clamps one for split application and the other for pinhole application over damaged petroleum pipelines.Intended Use: Clamps are intended to be used for emergency repair ...Subject(s) : Pinhole application , Split application , -
MIL-PRF-32033 VALID NOTICE 1
Abstract: This specification covers one type and grade of water-displacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil can be applied by dipping, ...Subject(s) : Lubrication , NATO STANAGs 1135 and 7094 , -
MIL-PRF-32073A (1)
Abstract: This specification covers hydraulic fluids made with renewable resources for use in environmentally sensitive areas (see 6.1). Intended Use: The biobased hydraulic fluid covered by this specification is ...