NAVY - NU - Navy Clothing and Textile Research Facility
Browse by
Recent Submissions
-
MIL-C-1164G
Abstract: This specification covers the requirements for terry cloth of one type only. Intended Use: The terry cotton is to be used as a wiping cloth where a lint free soft cloth is needed. -
MIL-C-24935
Abstract: This specification covers the requirements for a flame resistant coverall with a para-aramid and polybenzimidazole (PBI) blend outershell, a quilted aramid liner and a waterproof moisture barrier interlining. Intended ...Subject(s) : Clothing , Protective , Coveralls , Damage Control , Coveralls , Flame Resistant , Coveralls , PBI , Coveralls , Pyrotechnic Handlers , Protective , Coveralls , Reflective Tape , -
MIL-C-15104F
Abstract: This specification covers the requirements for a flame resistant coated cloth used as berth and bedding covers.
The coated cloth shall be of the following classes (see 6.2):Class 1 - 24 to 26 ...
Subject(s) : Fabric , cotton , laminated , Fabric , fire retardant , Green 14062 , Green 24449 , -
A-A-50368A
Abstract: This Commercial Item Description is authorized for use in preference to MIL-C-24921. -
MIL-F-17619E
Abstract: This specification covers the requirements for cap frames, to be worn by male personnel of the Navy and Coast Guard. Intended Use: The cap frames covered by this specification are intended for use by male ... -
MIL-I-17988/12B
Abstract: This Specification sheet is approved for use by the United States Coast Guard, Department of Transportation and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-24933
Abstract: This specification covers the requirements for one type of flannel cotton cloth which has been treated with a flame retardant finish. Intended Use: The cloth covered by this specification is intended for use ...Subject(s) : Cloth , flannel , Fiber , cotton , Finish , flame retardant , Gloves , anti-flash , flame resistant , -
MIL-G-82241C
Abstract: This specification covers the requirements for knitted cotton glove inserts, of one type and size only. Intended Use: The gloves covered by this specification are intended for use by personnel working in the ...