NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 161-180 of 2147
-
MIL-W-8982/6
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the combination wrenches described herein shall consist of this document and ... -
MIL-DTL-85694A
Abstract: This specification covers the requirements for blended spectrometric oil standards for use in calibrating or verifying the calibration of spectrometers used in spectrometric analysis of metallic elements found in oils and ... -
MIL-DTL-6363/14A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ... -
MIL-B-85464
Abstract: This specification establishes the requirements for manufacture and acceptance of the MARK 38 MOD 2 Fuze Booster, referred to herein as the booster. Intended Use: The booster is intended for use in the ... -
MIL-F-8815/5A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the filter assembly described herein shall consist of this document and the ... -
MIL-H-85042A
Abstract: This specification covers the manufacture and inspection of bomb rack hooks. The test limits of this specification define minimum acceptable capabilities.
Bomb rack hooks covered by this specification shall be of the ... -
TT-T-656C
Abstract: This specification covers tricresyl phosphate, a reaction product of cresylic acid and a phosphorus compound. Cresylic acid derived from petroleum or coal tar is acceptable. Intended Use: The uses of tricresyl ...Subject(s) : Adhesive , Antiwear agent , Lubrication , Petroleum additive , -
A-A-59315/24
Abstract: This commercial item description sheet (CID) covers a tungsten carbide-cobalt powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-L-85546B
Abstract: This specification establishes the requirements for the manufacture and inspection of the Launcher, Rocket LMU-23A/E and LMU-23B/E. Intended Use: The LMU-23A/E and the LMU-23B/E launchers are intended for ...Subject(s) : Firing pin , Firing switch , Igniter , PVU-3A/E , Igniter , PVU-3B/E ,