درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 361-380 of 22183
-
DIN EN 1794-3
Abstract: Scope: This European Standard is to give authorities, designers and specifiers information with respect to reaction to fire, smoke density and toxic fumes of materials used in noise reducing devices. The combination of ... -
DIN EN 6092
Abstract: Scope: Diese Europäische Norm legt die Maße, Toleranzen, Anforderungen und die Masse einer Haltenocke zur Anwendung bei der Inneneinrichtung von Luftfahrzeugrümpfen und in strukturellen Anwendungen in der ... -
-
DIN EN 1383
Abstract: Scope: This European Standard specifies the test method for determining the resistance of timber to the head pull through of timber fasteners. In this standard \'timber\' includes solid timber, glued laminated timber and ... -
DIN EN ISO 11426
Abstract: Scope: This International Standard specifies a cupellation method (fire assay) for the determination of gold in gold jewellery alloys. The gold content of the alloys should preferably lie between 333 and 999 parts per ... -
DIN EN 62769-103-4
Abstract: Scope: This part of IEC 62769 specifies an FDI profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784- 2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET3)). 3) PROFINET is the trade name of the non-profit consortium PROFIBUS & ... -
DIN EN ISO 14644-2
Abstract: Scope: This part of ISO 14644 specifies minimum requirements for a monitoring plan for cleanroom or clean zone performance related to air cleanliness by particle concentration, based upon parameters that measure or affect ... -
DIN EN 3660-065
Abstract: Scope: Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform K, 90°, Schirmanschluss, abgedichtet, selbstsichernd (verdrehgesichert), für wärmeschrumpfende Bauteile, und/oder Metallbänder, ... -
DIN EN ISO 17468
Abstract: Scope: This International Standard gives technical requirements and guidance on the establishment or revision of standardized reference methods for the analysis (detection or quantification) of microorganisms in — ... -
DIN EN ISO 8362-1
Abstract: Scope: This part of ISO 8362 specifies the form, dimensions and capacities of glass vials for injectable preparations. It also specifies the material from which such containers shall be made and the performance requirements ... -
DIN EN 10305-2
Abstract: Scope: This European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D ≤ 150 mm. This document ... -
-
DIN ISO 5630-4
Abstract: Scope: Scope and field of application This part of ISO 5630 specifies a procedure for heat treatment of paper and board in air at relatively high temperature and the general procedure for testing for heat-treated material. ... -
DIN EN 13480-5 BERICHTIGUNG 2
Abstract: Scope: This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1:2012 to be performed on individual spools or piping systems, including supports, ... -
-
DIN EN ISO 10751
Abstract: Scope: This International Standard describes a method intended to determine the resistance of a slide fastener to repeated opening and closing. The method is applicable to all types of slide fastener with a teeth length ... -
DIN EN 13179-1
Abstract: Scope: This European Standard specifies the procedure used to determine the stiffening effect of filler aggregate when mixed with bitumen. -
DIN EN 16484
Abstract: Scope: This European Standard defines the requirements that are necessary to confer the origin of leather production based on the principle of the last substantial transformation according to Non-Preferential Rules of ... -
DIN EN 3660-001
Abstract: Scope: Diese Europäische Norm legt Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder für die Anwendung in der Luft- und Raumfahrt fest. Diese Endgehäuse dürfen abgedichtet ... -
DIN EN ISO 18556
Abstract: Scope: This International Standard specifies requirements and their test methods for metallic and non-metallic intraoral spatulas used to introduce and model filling materials into a tooth cavity, including single use ...