درباره ما
ASME - ASME International: Recent submissions
Now showing items 21-40 of 1083
-
Pressure Relief Devices
Abstract: (a) This Code provides instructions in Part II for flow capacity testing and in Part III for in-service and bench testing. Testing of reclosing and nonreclosing pressure relief devices is conducted under various inlet and ... -
ASME BOILER AND PRESSURE VESSEL CODE, SECTION VIII, DIVISION 3, EXAMPLE PROBLEM MANUAL
Abstract: Example problems illustrating the use of the analysis methods in BPVC Section VIII, Division 3 are provided in this publication. -
Test Uncertainty
Abstract: The scope of this Standard is to specify procedures for (a) evaluation of uncertainties in test measurements, parameters, and methods (b) propagation of those uncertainties into the uncertainty of a test result Depending ... -
Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Metallic Components
Abstract: The United States Government retains, and by accepting the work for publication, the publisher acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, worldwide license to publish or ... -
Guidelines for Pressure Boundary Bolted Flange Joint Assembly
Abstract: These guidelines for bolted flange joint assemblies (BFJAs) apply principally to pressure-boundary flanged joints with ring-type gaskets that are entirely within the circle enclosed by the bolt holes and with no contact ... -
Safety Standard for Portable Automotive Service Equipment
Abstract: Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. ... -
Digital Product Definition Data Practices
Abstract: This Standard establishes requirements and references documents applicable to the preparation and revision of digital product definition data, hereafter referred to as data sets. This Standard defines exceptions and ... -
Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Abstract: SCOPE OF ASME B30.10 Volume B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks shown in Chapters 10-1 and 10-2 used for load handling purposes, in conjunction ... -
Pipeline Transportation Systems for Liquids and Slurries
Abstract: This Code prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of liquid pipeline systems between production fields or facilities, tank farms, above- ... -
Cast Iron Threaded Drainage Fittings
Abstract: This Standard for cast iron threaded drainage fittings covers (a) sizes and method of designating openings in reducing fittings (b) marking (c) material (d) dimensions and tolerances (e) threading (f) ribs (g) ... -
Hydrogen Piping and Pipelines
Abstract: This Code is applicable to piping in gaseous and liquid hydrogen service and to pipelines in gaseous hydrogen service. This Code is applicable up to and including the joint connecting the piping to associated pressure ... -
Planning for Load Handling Activities
Abstract: This Standard establishes planning considerations and practices that apply to load handling equipment (LHE), other associated equipment, and activities when moving loads vertically orhorizontally. Theplanning guidance ... -
Safety Standard for Thermal Energy Storage Systems: Molten Salt
Abstract: This Standard establishes requirements for the design, construction, installation, inspection, testing, commissioning, maintenance, operation, and decommissioning of molten salt thermal energy storage (TES) systems. Molten ... -
Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices
Abstract: Equipment Covered by This Code This Code covers the design, construction, operation, inspection, testing, maintenance, alteration, and repair of the following equipment and its associated parts, rooms, spaces, and hoistways, ... -
Reinforced Thermoset Plastic Corrosion-Resistant Equipment
Abstract: (a) This Standard applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15.0 psig (103 kPag) external and/or 15.0 psig (103 kPag) internal ... -
Quality Assurance Requirements for Nuclear Facility Applications
Abstract: PURPOSE Part I — this Part — establishes requirements for the development and implementation of a Quality Assurance Program (QAP) for nuclear facility applications. It is arranged by Requirements 1 through 18. Part II ... -
Guide for Elevator Seismic Design
Abstract: This Technical Report provides rationale for elevator seismic force determination in ASME A17.1/CSA B44, Section 8.4. It details ASME A17.1/CSA B44 harmonization efforts with all building codes and summarizes the harmonization ... -
Creep-Fatigue Flaw Growth Analysis to Support Elevated Temperature Flaw Size Acceptance Criteria
Abstract: TerraPower, LLC is the Independent Consultant hired by ASME ST-LLC to analyze a matrix of typical elevated temperature components using recognized creep-fatigue flaw growth analysis methods and data. The scope of the work ... -
Reliability, Availability, and Maintainability of Equipment and Systems in Power Plants
Abstract: This Standard identifies the elements and responsibilities required to establish a RAM program for any power-generation facility. The program process includes (a) establishment of RAM goals (b) development of requirements ... -
Operation and Maintenance of Nuclear Power Plants
Abstract: GENERAL In 2008, the OM Committee directed that the two separately published OM Code and the OM Standards and Guides (OM-S/G) publications be combined into one document. This was done to ensure all of our standards and ...