Hydrogen Piping and Pipelines

ASME B31.12 ERTA

contributor author	ASME - ASME International
date accessioned	2020-07-27T20:51:27Z
date available	2020-07-27T20:51:27Z
date issued	2020
identifier other	VYGOMGAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho54037D839D40527361598F1ED52F014A/handle/yse/280453
description abstract	Paragraph GR-3.9.2 was inadvertently omitted from ASME B31.12-2019, page 48. Pipe may be bent and components may be formed by any hot or cold method that is suitable for the material, the intended service, and the severity of the bending or forming process. When selecting material for hydrogen service, consideration shall be given to the effects of cold working, which may promote lower resistance to HE, while hot working enhances resistance to HE. The finished surface shall be free of cracks and substantially free from buckling. Thickness after bending or forming shall be not less than that required by the engineering design
language	English
title	Hydrogen Piping and Pipelines	en
title	ASME B31.12 ERTA	num
type	standard
page	2
status	Active
tree	ASME - ASME International:;2020
contenttype	fulltext