DLA - GS - DLA Aviation - Richmond

O-M-232L

Sun, 01 Jan 2006 00:00:00 GMT

O-M-232L; METHANOL (METHYL ALCOHOL) DLA - GS - DLA Aviation - Richmond This specification covers three grades and four unit quantities of methanol.Intended Use: Grade A methanol is intended for use as an industrial solvent. Grade AA methanol is intended for use in the generation of hydrogen and carbon dioxide. Grade C methanol (wood alcohol) is a product of the destructive distillation of wood and is intended for use as a denaturant.

MIL-D-80077B

Wed, 01 Jan 1975 00:00:00 GMT

MIL-D-80077B; DRILLING MACHINES, UPRIGHT, TURRET TYPE, SLIDING HEAD, BED TYPE, NUMERICALLY CONTROLLED DLA - GS - DLA Aviation - Richmond

L-P-516A

Sun, 01 Jan 1967 00:00:00 GMT

L-P-516A; PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST DLA - GS - DLA Aviation - Richmond This specification covers the requirements for thermosetting resins cast from monomers or from partly polymerized material into sheets, rods, tubes, and other forms, for use in military equipment. Intended Use: Parts machined from this material are intended for general usage. They possess good machinability, excellent abrasion resistance, and high heat resistance. Models made from this material may be used for the optical study of stress distribution. Parts machined from this material are intended for general usage. They have good optical properties, good loss factor, high dielectric strength, and high resistivity; however, care must be taken in machining and handling. Parts machined from this material are intended for ultrahigh-frequency applications and show practically no change in dielectric constant, and only slight change in dissipation factor, at the higher frequencies. Parts machined from this material are intended for such applications as knobs, pointers, dials, and similar mechanical components of electronic equipment where good mechanical, rather than electrical, properties are essential.

MIL-M-23589B

Mon, 01 Jan 1973 00:00:00 GMT

MIL-M-23589B; MILLING MACHINE, VERTICAL, ROTARY DLA - GS - DLA Aviation - Richmond This specification covers a floor mounted, vertical, rotary head, high speed, precision milling machine with equipment and accessories as described herein. Intended Use: The machine equipped with the necessary attachments can be used for milling a wide variety of solid geometric forms by working directly from drawings without the necessity of models or templates, and without changing the set-up of the workpiece. In addition the machine can be used for precision boring, drilling, slotting, and conventional vertical milling.