MIL-HDBK-400 NOTICE 1

CRITERIA FOR PREPARATION OF GEAR AND SPLINE ENGINEERING DRAWINGS

contributor author	ARMY - AT - Tank-Automotive and Armaments Command
date accessioned	2017-09-04T17:57:26Z
date available	2017-09-04T17:57:26Z
date copyright	03/20/1988
date issued	1988
identifier other	FOSSDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho54037D83FCDC527361598F1ED52F014A/handle/yse/180531
description abstract	This handbook covers parallel, intersecting, and nonintersecting axes gears, whose respective pitch surfaces of revolution are cylinders, cones and hyperboloids. It limits its coverage of splines to involute, parallel sided and straight nonparallel sided tooth forms. It does not attempt to cover either helical or tapered splines. Coverage of gear and spline types is, however, broad enough to permit adequate specification of special gear and spline configurations by supplementing or modifying comparable types within the scope of this handbook.
language	English
title	MIL-HDBK-400 NOTICE 1	num
title	CRITERIA FOR PREPARATION OF GEAR AND SPLINE ENGINEERING DRAWINGS	en
type	standard
page	269
status	Active
tree	ARMY - AT - Tank-Automotive and Armaments Command:;1988
contenttype	fulltext
subject keywords	Engineering drawings
subject keywords	gear and spline
subject keywords	Gear and spline
subject keywords	preparation of engineering drawings
subject keywords	Spline and gear
subject keywords	preparation of engineering drawings