درباره ما
ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 181-200 of 832
-
MIL-HDBK-400 NOTICE 1
Abstract: This handbook covers parallel, intersecting, and nonintersecting axes gears, whose respective pitch surfaces of revolution are cylinders, cones and hyperboloids. It limits its coverage of splines to involute, parallel sided ...Subject(s) : Engineering drawings , gear and spline , Gear and spline , preparation of engineering drawings , Spline and gear , preparation of engineering drawings , -
MIL-PRF-6083G
Abstract: This specification describes the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is rust inhibited ... -
MIL-PRF-53095A
Abstract: This specification covers collapsible, synthetic rubber, discharge hose assemblies for use in all ambient temperatures between −60 and +95 degrees Fahrenheit (°F) [−51 and +35 degrees Celsius (°C)]. ...Subject(s) : Arctic , Carts , Coupling halves , Coupling halves , cam-locking type , Couplings , Cover , Elastomer , Pumps , gasoline , Refuelers , aircraft , Trailers , Tubes , -
MIL-DTL-13714F
Abstract: This specification covers one type of trailer for use as a tactical military vehicle under extreme or unusual conditions of climate, weather, terrain, and military service. Intended Use: The trailers covered ...Subject(s) : Landing device , Payload , Towing , Transportability , -
MIL-PRF-53051B
Abstract: This specification covers wheel-mounted, diesel-engine-driven, self-priming, centrifugal, four-inch and six-inch pumping assemblies for fuel and potable water service.
The pumping assemblies will be of the following ...Subject(s) : Pump , 350 GPM , Pump , 600 GPM , Pump , Centrifugal , Self-Priming , Pump , Fuel , Pump , Liquid Bulk Transfer , Pump , Water , -
MIL-W-21338A
Abstract: This specification covers the procurement requirements for retaining key washers for use in assemblies with ball and roller bearings. Intended Use: Retaining key washers covered by this specification are ... -
A-A-59377A
Abstract: This Commercial Item Description (CID) covers the performance requirements for the quick-disconnect coupling assemblies, sexless type. The quick-disconnect, sexless couplings are used to provide a positive seal disconnect ...Subject(s) : Coupling assembly , Drybreak , Quick-disconnect , Sexless , Wetbreak , -
MIL-DTL-13714F VALID NOTICE 1
Abstract: This specification covers one type of trailer for use as a tactical military vehicle under extreme or unusual conditions of climate, weather, terrain, and military service. Intended Use: The trailers covered ...Subject(s) : Landing device , Payload , Towing , Transportability , -
A-A-59326D
Abstract: This commercial item description (CID) covers 21 types of quick-disconnect, cam-locking, coupling halves and their fittings used in fuel and water handling equipment. Intended Use: The quick disconnect couplings ...Subject(s) : Fitting , Hose coupling , Kamlok , Qdisc , -
MIL-M-13081F
Abstract: This specification covers a self-propelled, diesel-engine-driven, soil-stabilizing mixer. Intended Use: The mixer is intended to be used for mixing and blending stabilizing materials with subgrade soils in ...Subject(s) : Hydrostatic stabilizer , Mixer , Pulvi-mixer , Rotary tiller , Soil stabilizer , Soil tiller , -