درباره ما
ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 621-640 of 832
-
A-A-52506C VALID NOTICE 1
Abstract: This CID covers metal hose clamps that are used for holding flexible ducts, or hose on to a male fitting. These hose clamps are generally used on coolant, fuel, oil, vacuum, and emission systems. The selection of type and ... -
A-A-52597
Abstract: This CID covers requirements for cast-iron and steel swing check valves, hereinafter referred to as "valves", designed for liquid or gaseous petroleum products. -
A-A-52543
Abstract: This CID covers requirements for a fifth wheel assembly used in coupling a truck-tractor to a trailer. -
A-A-52532
Abstract: This CID covers the requirements for a universal socket used with the universal kingpin in coupling trailer to a truck-tractor or a trailer converter dolly fifth wheel. -
A-A-52527B
Abstract: This CID covers a 6.0 meter platform-based freight container (herein called ‘collapsible flatrack') which is suitable for conveyance by road, rail, sea, and storage of military equipment. -
A-A-59326/12B
Abstract: This specification covers a Male by Female type XI cam lock coupling reducer. -
A-A-52524/6
Abstract: This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids. -
A-A-52624A
Abstract: This commercial item description (CID) covers the requirements for ethylene glycol-based and propylene glycol-based automotive engine antifreeze. The antifreeze is to be suitable for use in all administrative vehicles, ...Subject(s) : Coolant , Engine , Ethylene , Freeze point , Glycol , Propylene , -
A-A-59784
Abstract: This commercial item description (CID) covers E-Glass cloth used as the reinforcement media in the manufacture of advanced composite materials using infusion processes or hand lay-up.Subject(s) : E-glass , Fiber reinforced composites , Woven Roving , -
A-A-52446
Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-S-62502 (AT) which is canceled. -
MIL-DTL-62736A
Abstract: This specification covers an Input/Output (I/O) Printed Wiring Assembly, herein referred to as the PWA. This is one of six printed wiring assemblies which comprise the Simplified Test Equipment/Internal Combustion ...Subject(s) : Automated Testing Equipment (ATE) test , Bus Transceiver , Crystal oscillator , Multiply/Divide Unit (MDU) , RS-232-C , RS-485 , Simplified Test Equipment/Internal Combustion Engine-Reprogrammable (STE/ICE-R) , Universal Asynchronous Receiver/Transmitter (UART) , Vehicle Test Meter (VTM) , -
MIL-HDBK-21
Abstract: This handbook gives guidelines for particular welded joint designs used in the development of military armored tank type vehicles. This handbook is for guidance only. This handbook cannot be cited as a requirement. If ...Subject(s) : Armored , tank type , Continuous fillet , Double-bevel-grooved , corner joint , Intermittent-fillet-welded joint , Single-v-grooved , butt joint , Staggered intermittent-fillet , Welded joint designs , -
A-A-52429A
Abstract: This CID establishes the requirements for a direct acting, poppet style, two-way shutoff solenoid operated valve for use on a military ground vehicle electronic drive system as an emergency bypass valve. -
MIL-STD-162E
Abstract: This standard establishes the minimum requirements for level A, level B, level C, and Commercial preservation, packing and marking of self-propelled materials handling equipment for shipment from contractors or for storage ... -
A-A-59326/20B
Abstract: This specification covers a Flanged Type XX wye (Y) Connection used in conjunction with flanged cam locking type couplings.