درباره ما
ASME - ASME International: Recent submissions
Now showing items 521-540 of 1083
-
ASME PTC 12.1
Abstract: This Code applies to all horizontal and vertical heaters except those with partial pass drain cooling zones. Designs with partial pass drain cooling zones are horizontal heaters with submerged drain cooling zones, and ... -
ASME HST-2
Abstract: (a) This Standard establishes performance requirements for hand chain manually operated chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads, usingwelded link type load ... -
ASME B47.1 ERTA
Abstract: This Standard covers standard designs for the following:
(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter
(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter
(c) ... -
ASME B73.1
Abstract: This Standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design. This Standard includes dimensional interchangeability requirements and certain design features to facilitate ... -
ASME N511
Abstract: This Standard covers the requirements for in-service testing of nuclear safety-related air treatment, heating, ventilating, and air-conditioning systems in nuclear facilities. -
ASME PTC PM
Abstract: The Scope includes fossil-fueled steam plants and the balance-of-plant portion of nuclear power plants. The guidelines include performance monitoring concepts, a description of various methods available, and means for ... -
ASME A112.18.9
Abstract: This Standard shall show material and performance specifications and use of protectors/insulators for exposed waste and supplies for public/commercial and private/residential buildings using product covered under this ... -
ASME B30.5
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B30.23 INTERPRETATIONS
Abstract: FOREWORD
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Standard Committee, Safety Standard for Cableways, Cranes, ... -
ASME B30.4
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME A17.5
Abstract: The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform ... -
ASME RTP-1
Abstract: GENERAL
The use of reinforced thermoset plastic (RTP) vessels, operating at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head, that contain corrosive and ... -
ASME B40.200
Abstract: This Standard is confined to analog, dial-type bimetallic actuated thermometers utilizing helical bimetallic elements that mechanically sense temperature and indicate it by means of a pointer moving over a scale. -
ASME B18.1.2
Abstract: This standard covers complete general and dimensional data for those types of large solid rivets recognized as "American National Standard" together with dimensional data applicable to manufactured heads after driving, ... -
ASME STP-PT-011
Abstract: This report includes a compilation of results obtained through a series of white papers developed as part of a gas transmission company JIP addressing specific issues related to SCC in gas pipeline HCAs. This report presents ... -
ASME B18.2.9
Abstract: This Standard describes the gage and procedure for checking bolt and screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable product standard. -
ASME B89.1.7
Abstract: This Standard specifies the requirements for steel measuring tapes, with respect to units (SI and U.S. Customary), graduations, numbering, designations, and accuracy requirements. -
ASME PTC 47.4
Abstract: This Code applies to combined cycle power plants (power blocks) that operate in conjunction with a gasification plant, an IGCC power plant, or an IGCC cogeneration plant.
This Code does not apply to power blocks other ... -
ASME PTC 12.3
Abstract: This Code applies to deaerating heaters and deaerators equipped with either shell-and-tube or direct contact, vent-condensing sections.
The Code describes the test method and procedures for the determination ...