درباره ما
ASME - ASME International: Recent submissions
Now showing items 541-560 of 1083
-
ASME PVHO-2
Abstract: INTRODUCTION AND SCOPE
(a) This Standard provides technical requirements and guidelines for the operation and maintenance of PVHOs and PVHO systems that were designed, constructed, tested, and certified ... -
ASME B89.7.5
Abstract: INTRODUCTION
This report describes the requirements for a particular interpretation1 of metrological traceability2 to the SI unit of length, i.e., the meter, for dimensional ... -
ASME B18.13A
Abstract: (a) This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as sems. The word sems is recognized in the United States as a generic term ... -
ASME B17.2
Abstract: This standard covers nomenclature, defininitions, identification number, dimensions and tolerances of Woodruff Keys and Keyseats.
It represents manufacturing practices for sizes and types from 1/16, in. × ... -
ASME P30-1
Abstract: PURPOSE
The P30 Standard is intended to
(a) prevent or minimize injury to people, and otherwise provide for the protection of life, limb, and property by offering guidance for planning ... -
ASME PTC 55
Abstract: This Code covers the performance testing of gas turbine aircraft engines at steady-state conditions. This Code applies to turbojet, turbofan, turboshaft, and turboprop engines. Additionally, the Code will encompass ram ... -
ASME B5.61
Abstract: This Standard applies to hydraulic and mechanical power presses commonly referred to by the metalworking industry as General Purpose, Single Action, Straight Side Type Power Presses that, by means of dies or tooling ... -
ASME A112.1.2
Abstract: This Standard identifies methods of providing protection against backsiphonage through means of an air gap and establishes physical requirements and methods of testing air gaps for plumbing fixtures and water receptors. -
ASME N278.1
Abstract: This standard establishes requirements for functional specification for safety-related self-operated and power-operated valves for applications in a nuclear power plant. -
ASME STP-NU-037
Abstract: Part I - Review of Current Operating Conditions Allowable Stresses in ASME Section III Subsection NH and Overview of the Availability of the Original and Augmented Databases Needed to Establish So, St, ... -
ASME HST-6
Abstract: (a) This Standard establishes performance requirements for air wire rope hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using wire rope as the lifting medium with one ... -
ASME B16.14
Abstract: This Standard for Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads covers:
(a) pressure-temperature ratings;
(b) size;
(c) marking;
(d) materials;
(e) ... -
ASME B5.18
Abstract: The first edition of this standard, known as B5.18-1943, resulted from intensive efforts dating back to 1926 by a special group of milling machine manufacturers; it was reaffirmed in 1949, revised in 1953 and again in ... -
ASME B16.5
Abstract: General
(a) This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. ... -
ASME MFC-1M
Abstract: This Standard consists of a collection of definitions of those terms that pertain to the measurement of fluid flow in pipes. Only those terms of general usage have been included. Terms having unique meaning when applied ... -
ASME B18.3.5M
Abstract: This Standard contains complete general and dimensional requirements for Metric Series Hexagon Socket Flat Countersunk Head Cap Screws of nominal sizes from 3 mm to 20 mm recognized as American National Standard. Also ... -
ASME BPE
Abstract: SCOPE OF THE ASME BPE STANDARD
The ASME BPE Standard provides requirements for systems and components that are subject to cleaning and sanitization and/or sterilization including systems that are cleaned ... -
ASME B30.10
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-handling related equipment. For the ... -
ASME PTC 3.2
Abstract: The Test Code for Solid Fuels specifies standard methods for a determination of those chemical and physical properties which serve as criteria of the value of these fuels when burned in any type of furnace.
... -
ASME PTB-2
Abstract: This guide provides a summary of some of the more commonly used codes, standards, recommended practices (RPs), specifications and guidelines produced by organizations based in the United States that assist manufacturers, ...