درباره ما
ASSE - ASSE/SAFE - American Society of Safety Engineers: Recent submissions
Now showing items 61-75 of 75
-
ASSE A10.17
Abstract: This standard applies to those operations involving hot mix asphalt (bituminous) mixtures and materials for construction and resurfacing. Safe work practices are included for the protection of workers and the public and ... -
ASSE Z9.6
Abstract: The requirements and emission and exposure control principles described in this standard represent the minimum criteria intended 1) to protect the health of personnel engaged in and working in the vicinity of grinding, ... -
ASSE A10.3
Abstract: This standard provides safety requirements for powder-actuated fastening tools that propel studs, pins, fasteners, or other objects for the purpose of affixing it, by penetration, to hard structural material (such as ... -
ASSE Z10
Abstract: This standard defines minimum requirements for an occupational health and safety management system (OHSMS).
Purpose
The primary purpose of this standard is to provide a management tool to reduce ... -
ASSE A10.13
Abstract: This standard establishes safety requirements for erecting, handling, fitting, fastening, reinforcing and dismantling of structural steel, plate steel, steel joist, and metal deck at a final in-place field site during ... -
ASSE A10.4
Abstract: This standard applies to the design, construction, installation, operation, inspection, testing, maintenance, alterations and repair of hoists and elevators that (1) are not an integral part of buildings, (2) are installed ... -
ASSE A1264.2
Abstract: This standard sets forth provisions for protecting persons where there is potential for slips and falls as a result of surface characteristics or conditions.
Purpose. The purpose of this standard is ... -
ASSE Z359.14
Abstract: This standard establishes requirements for the performance, design, qualification testing, markings and instructions, inspections, maintenance and storage, and removal from service of self-retracting devices (SRD's) including ... -
ASSE Z9.2
Abstract: This Standard establishes minimum requirements for the commissioning, design, specification, construction, and installation of fixed industrial local exhaust ventilation (LEV) systems used for the reduction and prevention ... -
ASSE Z359.1
Abstract: This standard establishes requirements for the performance, design, marking, qualification, instruction, training, inspection, use, maintenance, and removal from service of connectors, full body harnesses, lanyards, energy ... -
ASSE A10.38
Abstract: This standard establishes the minimum elements of a program for protecting the safety and health of employees involved in construction activities.
Purpose. The purpose of this standard is to assist ... -
ASSE Z9.4
Abstract: General. This standard applies to all operations in fixed location abrasive-blast enclosures in which an abrasive forcibly comes in contact with a surface by pneumatic or hydraulic pressure or by centrifugal ... -
ASSE A10.7
Abstract: This standard is applicable to the transportation, storage, handling, and use of commercial explosives and blasting agents in the construction industry.
This standard does not supersede legal requirements, or laws, or ... -
ASSE Z15.1
Abstract: This standard sets forth practices for the safe operation of motor vehicles owned or operated by organizations, including:
• Definitions
• Management, leadership and administration
• Operational ... -
ASSE A10.31
Abstract: Equipment Covered. This standard applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to accommodate components that dig holes, ...