درباره ما
MIL-PRF-83041C VALID NOTICE 1
Filter-Separator, Liquid Fuel, Skid Mounted FFU-15/E
Year: 2012
Abstract: This performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute (gpm) ± 10%. This FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit for refueling aircraft. Intended Use: The filter separators described in this document are military unique. The FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit. When used with this aircraft refueling equipment, the fuel delivered to the fuel storage tanks is clean (no more than 1.0 mg/ liter solid contaminant) and dry (no more than 15 mg/liter undissolved water). Media migration of 10 fibers/liter. Usage will be primarily in rear combat areas and in remote environments requiring the unit to be skid mounted, air transportable, and be provided with tie downs, grounding rods, and finished in accordance with Air Force requirements. In addition, the unit must be made from lightweight materials resistant to specified environmental conditions without degradation in performance.
Subject: Air eliminator
-
Statistics
MIL-PRF-83041C VALID NOTICE 1
Show full item record
| contributor author | AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF) | |
| date accessioned | 2017-09-04T17:57:48Z | |
| date available | 2017-09-04T17:57:48Z | |
| date copyright | 04/05/2012 | |
| date issued | 2012 | |
| identifier other | FPSUUEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=authoCA5893FD081D20686159DD6EFDEC014A/handle/yse/180881 | |
| description abstract | This performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute (gpm) ± 10%. This FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit for refueling aircraft. Intended Use: The filter separators described in this document are military unique. The FFU-15/E filter separator is intended for use with the A/E32R-14 fuel-servicing unit. When used with this aircraft refueling equipment, the fuel delivered to the fuel storage tanks is clean (no more than 1.0 mg/ liter solid contaminant) and dry (no more than 15 mg/liter undissolved water). Media migration of 10 fibers/liter. Usage will be primarily in rear combat areas and in remote environments requiring the unit to be skid mounted, air transportable, and be provided with tie downs, grounding rods, and finished in accordance with Air Force requirements. In addition, the unit must be made from lightweight materials resistant to specified environmental conditions without degradation in performance. | |
| language | English | |
| title | MIL-PRF-83041C VALID NOTICE 1 | num |
| title | Filter-Separator, Liquid Fuel, Skid Mounted FFU-15/E | en |
| type | standard | |
| page | 1 | |
| status | Active | |
| tree | AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012 | |
| contenttype | fulltext | |
| subject keywords | Air eliminator | |
| subject keywords | Coalescer | |
| subject keywords | Differential pressure gauge | |
| subject keywords | Ground rod | |
| subject keywords | Spider assembly | |
| subject keywords | Water slug valve |