درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 401-420 of 1822
-
API RP 10B-3
Abstract: General This recommended practice provides procedures for testing well cement slurries and cement blends for use in a deepwater environment or wells drilled in areas with a low seafloor temperature or areas where low well ... -
API RP 615
Abstract: This Recommended Practice (RP) provides general guidance on valve selection for the hydrocarbon processing industry (HPI), which includes refineries and petrochemical, chemical, and liquefied natural gas (LNG) plants and ... -
API RP 781
Abstract: General The purpose of a facility security plan (FSP) is to provide the framework to establish a secure workplace. The plan provides an overview of the threats facing the facility and describes the security measures and ... -
API RP 572
Abstract: This recommended practice (RP) supplements API 510 by providing pressure vessel inspectors with information that can improve skills and increase basic knowledge of inspection practices. This RP describes inspection practices ... -
API TR 2574
Abstract: Applicability This method applies to the measurement of volatile organic compounds (VOC) as total gaseous nonmethane organics (TGNMO), methane and ethane from the air–vapor mixture that is expelled during filling of ... -
API SPEC 15HR
Abstract: Coverage This specification was formulated to provide for the availability of safe, dimensionally, and functionally interchangeable high-pressure fiberglass line pipe with a pressure rating from 500 lbf/in.2 to 5000 lbf/in.2 ... -
API RP 1646
Abstract: General This Recommended Practice (RP) highlights some of the federal Occupational Safety and Health Administration (OSHA) requirements that may apply to maintenance and construction work in the retail petroleum/convenience ... -
API RP 1167
Abstract: This document is intended to provide pipeline operators with recommended industry practices in the development, implementation, and maintenance of an alarm management program. It provides guidance on elements that include, ... -
API RP 581
Abstract: Purpose This recommended practice, API RP 581, Risk-Based Inspection Methodology, provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment including ... -
API TR 17TR7
Abstract: This Technical Report provides requirements and recommendations for the verification and validation of subsea connectors. It is intended to serve as a common reference for designers, manufacturers, and users to improve the ... -
API MPMS 20.2
Abstract: This standard is applicable to single-phase measurement techniques upstream of the custody transfer points where custody transfer conditions are not possible. The standard presents single-phase flow measurement used in the ... -
API MPMS 10.2
Abstract: This test method covers the determination of water in crude oil by distillation. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. This standard does ... -
API STD 641
Abstract: This standard specifies the requirements and acceptance criteria for fugitive emission type testing of quarterturn valves. The type testing requirements contained herein are based on elements of EPA Method 21. Valves larger ... -
API STD 537
Abstract: This standard specifies requirements and provides guidance for the selection, design, specification, operation, and maintenance of flares and related combustion and mechanical components used in pressurerelieving and ... -
API MPMS 23.1
Abstract: General This publication provides methodologies for monitoring liquid pipeline loss/gain and for determining the normal loss/gain level for any given pipeline system. Troubleshooting suggestions are also presented. ... -
API RP 582
Abstract: This recommended practice (RP) provides supplementary guidelines and practices for welding and welding related topics for shop and field fabrication, repair and modification of the following: a) pressure-containing equipment ... -
API MPMS 18.2
Abstract: This standard defines the minimum equipment and methods used to determine the quantity and quality of crude oil being loaded from a lease tank to a truck trailer without requiring direct access to a lease tank gauge hatch. ... -
API TR 934-G
Abstract: This technical report includes information and guidance on the practices used by industry practitioners on the design, fabrication, operation, inspection, assessment and repair of coke drums and peripheral components in ... -
API MPMS 8.2
Abstract: This practice describes general procedures and equipment for automatically obtaining samples of liquid petroleum and petroleum products, crude oils, and intermediate products from the sample point into the primary container. ... -