درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 441-460 of 39933
-
Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
Abstract: This test method covers atomic absorption tests applicable to powdered laundry detergents containing clay and zeolite. The test sample is fused with lithium metaborate, dissolved in acid, its silicon and aluminum content ... -
Standard Specification for Headed Steel Bars for Concrete Reinforcement
Abstract: This specification covers deformed and plain steel reinforcing bars in cut lengths with a head attached to one or both ends for reinforcing concrete structures. This standard applies only to headed bars with welded, threaded ... -
Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
Abstract: 4.1 Personnel trained for coating and lining work inspection are required to perform examination/inspection tasks to verify conformance of coating and lining work to written requirements. 4.2 This guide provides guidance ... -
Standard Specification for Steel Castings, Austenitic Manganese
Abstract: This specification covers Hadfield austenitic manganese steel castings and alloy modifications. The castings shall be suitably heat treated to achieve toughness and ductility. This heat treatment shall consist of uniformly ... -
Standard Guide for Care Symbols for Care Instructions on Textile Products
Abstract: 4.1 This guide provides symbols and a system for their use by which care instructions for textile products can be conveyed in a simple, space-saving, and easily understood pictorial format that is not language dependent. ... -
Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
Abstract: 4.1 This guide outlines general procedures and precautions necessary for correct and safe application of spray applied polyurethane foam roofing systems. 4.2 This guide is not all-inclusive; this guide is intended only ... -
Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
Abstract: 4.1 Numerous ASTM test methods and practices (for example: Test Methods D5259 and D5392, and Practices D6974 and E2563) report colony counts as their measured parameter. 4.2 These practices provide a uniform set of counting, ... -
Standard Test Method for pH Measurement of Water of Low Conductivity
Abstract: 6.1 pH measurement of low conductivity water is frequently applied to power plant water and condensed steam samples for corrosion and scale prevention. It is sometimes used in pure water treatment systems between multiple ... -
Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
Abstract: 5.1 Elastic recovery is related to the ability of a package to resume its original shape after being distended during its use cycle. 5.2 Elastic recovery also relates to the tightness or snugness of a package. 5.3 Stress ... -
Standard Test Method for Peel Cling of Stretch Wrap Film
Abstract: 5.1 Cling is of critical importance in maintaining a tight wrap after a load is stretch wrapped. -
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
Abstract: 5.1 The preparation of field logs provides documentation of field exploration procedures and findings for geotechnical, geologic, hydrogeologic, and other investigations of subsurface site conditions. This guide may be ... -
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Abstract: 5.1 Some process catalysts used in petroleum and chemical refining can be poisoned when trace amounts of sulfur bearing materials are contained in the feedstocks. This test method can be used to determine sulfur in process ... -
Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
Abstract: 4.1 Upon mutual agreement between the purchaser and the supplier, woven and knitted products intended for this end use should meet all of the requirements listed in Table 1 of this specification. 4.2 It is recognized that ... -
Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
Abstract: 4.1 This test method is intended to provide only a comparative procedure for evaluating unknown films against a standard or control film whose performance has been defined as adequate in actual field conditions. 4.2 This ... -
Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
Abstract: This specification covers several different types of chemical passivation treatments for stainless steel parts. The treatments are the following: immersion treatment using nitric acid solutions, immersion treatment using ... -
Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
Abstract: 5.1 This test method is intended to be used mainly as a means of comparing the performance of unitizing films. It can also be used to compare the effectiveness of different wrap cycles with the same wrapping materials. No ... -
Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
Abstract: 4.1 This test method is intended to be used mainly as a means of comparing the performance of stretch-wrap films. It can also be used to compare the effectiveness of different wrap cycles with the same wrapping materials. ... -
Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
Abstract: 4.1 This test method tests the hydrostatic resistance of a waterproofing membrane and can be used to compare the hydrostatic resistance of waterproofing membranes. It includes two specimen preparation procedures, one for ... -
Standard Specification for Reclaimed Perchloroethylene
Abstract: This specification establishes the requirements for reclaimed perchloroethylene typically needed in various industries for noncritical applications such as in metal cleaning formulations. This is not recommended for dry ... -
Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
Abstract: 5.1 Chlorinated compounds can lead to corrosion of equipment and poisoning of the catalyst. Chlorinated compounds also present a health hazard when incompletely combusted. Chlorine content of petroleum products is determined ...