درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 521-540 of 39933
-
Standard Classification for Hot-Mix Recycling Agents
Abstract: 3.1 Recycling of deteriorated asphalt pavements is being used with increasing frequency for its economy and benefit of conserving raw materials. The objective of recycling is to reuse the two ingredients of asphalt ... -
Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
Abstract: 4.1 The requirements of this guide apply to personnel who perform coating and lining work inspection during (1) fabrication, (2) receipt of items at the construction site, (3) construction, (4) pre-operational and startup ... -
Standard Test Method for Determination of Carbon Residue (Micro Method)
Abstract: 5.1 The carbon residue value of the various petroleum materials serves as an approximation of the tendency of the material to form carbonaceous type deposits under degradation conditions similar to those used in the test ... -
Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
Abstract: This specification establishes the performance requirements and test methods for molded polyethylene open-head, self-supporting, and nonreusable pails used in packaging and transporting nonhazardous goods. The products for ... -
Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
Abstract: 4.1 Normally clothes cleaned with perchloroethylene will have a clean cloth odor. If a foreign odor is present, it may be objectionable. -
Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
Abstract: 4.1 In general, steam treatment of FCC catalyst can be used either to compare a series of cracking catalysts at a simulated equilibrium condition or conditions, or to simulate the equilibrium condition of a specific cracking ... -
Standard Test Methods for Crosshole Seismic Testing of Soil and Rock
Abstract: 5.1 Crosshole seismic tests provide data about the seismic wave velocities of subsurface stratigraphic materials between boreholes as a function of depth at a site (1).3 Seismic wave velocities are directly related to the ... -
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
Abstract: This specification establishes the properties and test methods for aqueous dispersions of polytetrafluoroethylene (PTFE) resins, and is used to determine if a shipment, lot, or container of PTFE dispersions is suitable for ... -
Standard Practice for Measurement of Wet Film Thickness by Notch Gages
Abstract: 4.1 Wet film thickness measurements of coatings applied on articles can be very helpful in controlling the thickness of the final dry coating, although in some specifications the wet film thickness is specified. Most ... -
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
Abstract: This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. Several grades are covered, such as; SC 1020, SC 1025, SC 1030, SC 1040, SC 1045, SC ... -
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
Abstract: 5.1 This test method is intended for use in determining the volume and the volume distribution of pores in soil and rock with respect to the apparent diameter of the entrances of the pores. In general, both the size and ... -
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
Abstract: 4.1 Evaluation of sag resistance is essential in quality control for both producers and purchasers of coatings. Practical application tests are poor in reproducibility, while viscometric methods, for example Test Methods ... -
Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
Abstract: 5.1 This gas adsorption method complements the X-ray procedure of Test Method D3906. This test method will be useful to laboratories that do not have X-ray diffractometers. Each test method can be calibrated by use of an ... -
Standard Specification for Vapor-Degreasing Grade Perchloroethylene
Abstract: This specification covers the requirements and corresponding test methods for vapor-degreasing grade perchloroethylene. When tested, materials shall conform to the following physical properties: specific gravity; distillation ... -
Standard Test Methods for Analysis of Linear Detergent Alkylates
Abstract: 3.1 These test methods are suitable for setting specifications on linear detergent alkylates and for quality control where these alkylates are manufactured or are used in a manufacturing process. 3.2 The gas chromatography ... -
Standard Test Method for Anions in Water by Suppressed Ion Chromatography
Abstract: 5.1 Ion chromatography provides for both qualitative and quantitative determination of seven common anions, F−, Cl−, NO2−, HPO4−2, Br−, NO3−, and SO4−2, in the milligram per litre range from a single analytical operation ... -
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
Abstract: 5.1 This test method is useful for evaluating and characterizing tars and pitches and is one element in establishing the uniformity of shipment or sources of supply. -
Standard Specification for Calcium Borosilicate Pigments
Abstract: This specification covers three grades of pigment commercially known as calcium borosilicate composite pigment. The two types differ in chemical composition while the two classes of type I differ in oil absorption. The ...