درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 621-640 of 39933
-
Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
Abstract: This test method covers the determination of ethylene oxide content in polyethoxylated nonionic surfactants. It can also be used for compounds containing propylene oxide or any compounds (glycols and glycol and polyglycol ... -
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
Abstract: This specification covers metallic-coated carbon steel wire for the manufacture of chain-link fence fabric and marcelled tension wire. Three coating types, namely: Type I (aluminized), Type II (galvanized), and Type III ... -
Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
Abstract: This practice covers sampling and analysis procedures for the investigation and evaluation of allowable properties of specified populations of stress-graded structural lumber. This practice generally assumes that the ... -
Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
Abstract: 5.1 This test method is one of a number of tests conducted on a crude oil to determine its value. It provides an estimate of the yields of fractions of various boiling ranges and is therefore valuable in technical discussions ... -
Standard Test Method for Total Ash Content of Activated Carbon
Abstract: 4.1 In specific end uses, the amount and composition of the ash may influence the capabilities and certain desired properties of activated carbon. 4.2 Other automated methods for determination of ash content, such as ... -
Standard Test Method for Apparent Density of Activated Carbon
Abstract: 4.1 This test method provides a method for determining the packed density of a bed of granular activated carbon. Determination of the packed density is essential when designing vessels to hold the material and for ordering ... -
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
Abstract: 5.1 In this test method, the compressive strength of a soil is determined in terms of the total stress, therefore, the resulting strength depends on the pressure developed in the pore fluid during loading. In this test ... -
Standard Test Method for Water Absorption of Rigid Cellular Plastics
Abstract: 5.1 The purpose of this test method is to provide a means for comparing relative water absorption tendencies between different cellular plastics. It is intended for use in specifications, product evaluation, and quality ... -
Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
Abstract: 3.1 The nonvolatile content of paint and related coatings is useful to producers and users and to environmental and health and safety interests in comparing the coverage of competing products and in estimating the volatile ... -
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
Abstract: This specification covers a lubricant suitable for facilitating the insertion and positioning of preformed elastomeric compression seals in prepared voids (usually contraction joints) in concrete pavements. The lubricant ... -
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
Abstract: This specification covers five grades of as-welded, wrought austenitic stainless steel fittings for low-pressure piping and for low and moderate temperatures and general corrosive service. The fittings shall be made from ... -
Standard Specification for Styrene Monomer
Abstract: This specification covers styrene monomer. The purity, aldehydes, peroxides, polymer, inhibitor, ethylbenzene, water, and color shall be tested to meet the requirements specified. -
Standard Practice for Sampling Leather for Physical and Chemical Tests
Abstract: 4.1 The sampling procedures described in this practice have been designed to ensure random sampling of finished leather and fabricated leather items for physical and chemical tests. Leather is a natural product and as such ... -
Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
Abstract: 4.1 The procedure described is specific for chromium in leather. The precision and accuracy of the methods are usually at least as good as the sampling of the leather itself. 4.2 The chromium content of leather relates ... -
Standard Test Method for Volume Resistivity of Conductive Adhesives
Abstract: 5.1 Accurate measurement of the volume resistivity of conductive adhesives is important, particularly with respect to applications in electronic packaging techniques. This method measures the resistance of conductive ... -
Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
Abstract: 5.1 This test distinguishes between hot melts having different apparent viscosities. It is believed that apparent viscosity determined by this procedure is related to flow performance in application machinery operating ... -
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
Abstract: This specification covers acrylonitrile-butadiene-styrene (ABS) and poly(vinyl chloride) (PVC) thermoplastic composite pipe, fittings, and a joining system for use in gravity flow, nonpressure sanitary sewer, and storm ... -
Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
Abstract: 5.1 This test method is considered satisfactory for acceptance testing of commercial shipments since current estimates of between-laboratory precision are acceptable and the method is used extensively in the trade for ...