درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 701-720 of 39933
-
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
Abstract: 5.1 Density is weight per unit volume. It is a key property in the identification, characterization, and quality control of a wide range of materials. Density measurements in terms of weight per gallon are commonly used ... -
Standard Test Method for Permanganate Time of Acetone and Methanol
Abstract: 4.1 The permanganate time can be used to judge the presence of oxidizable materials that may be associated with manufacture or contamination during distribution and to assess compliance with a specification. 4.2 Many ... -
Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
Abstract: 5.1 This test method provides an indication of the relative smoke producing properties of kerosenes and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon type composition of such ... -
Standard Test Method for Carbon Black—Iodine Adsorption Number
Abstract: 4.1 The iodine adsorption number is useful in characterizing carbon blacks. It is related to the surface area of carbon blacks and is generally in agreement with nitrogen surface area. The presence of volatiles, surface ... -
Standard Test Methods for Nonvolatile Content of Resin Solutions
Abstract: 3.1 The nonvolatile content of resin solutions is useful to coatings producers and users for the determination of the total solids available for film formation and for the estimation of the volatile organic content. -
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
Abstract: 4.1 Wet film thickness measurements aid in the prediction of dry film thickness. In instances where dry film thickness cannot be measured nondestructively, wet film thickness is frequently specified. Also, the ability to ... -
Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
Abstract: 3.1 The property of color of a solvent varies in importance with the application for which it is intended, the amount of color that can be tolerated being dependent on the color characteristics of the material in which it ... -
Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
Abstract: 4.1 Static compression and bending tests provide data that are used to estimate stiffness, strength, and safe working loads for pallets under specified load and support conditions. These estimates provide a basis for ... -
Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
Abstract: 4.1 Molded or extruded rubber products must withstand the effects of ozone cracking and outdoor weathering for satisfactory use. This test enables a simple comparison of performance to be made under specified test conditions ... -
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
Abstract: This specification covers cold-rolled steel sheet in coils or in cut lengths, tin-coated by electrodeposition. The product is commonly known as electrolytic tin-coated sheet, and is for applications that need good ... -
Standard Nomenclature of Commercial Hardwoods and Softwoods
Abstract: 4.1 The purpose of this standard is to provide common tree names and botanical names for commercial species and species groups but is not intended to be all inclusive of commercial practice. The decision about which ... -
Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
Abstract: 4.1 The significance of these test methods lies in the ability to differentiate between the degrees of ozone resistance under the limited and specified conditions of the accelerated tests. The degree of resistance being ... -
Standard Test Methods for Relative Density of Gaseous Fuels
Abstract: 5.1 These test methods provide accurate and reliable methods to measure the relative density of gaseous fuels on an intermittent or continuous basis. These measurements are frequently used for regulatory or contract ... -
Standard Test Method for Hardness in Water
Abstract: 5.1 Hardness salts in water, notably calcium and magnesium, are the primary cause of tube and pipe scaling, which frequently causes failures and loss of process efficiency due to clogging or loss of heat transfer, or both. ... -
Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
Abstract: 4.1 The procedures described in this practice are intended to aid in evaluating the performance of coatings on various metal panels including either new or rusted steel. 4.2 The relative durability of paints in outdoor ... -
Standard Practice for Sampling Steam
Abstract: 5.1 It is essential to extract and transport steam in a manner that provides the most representative sample of the process steam in order to accurately determine the amount of all impurities (dissolved chemicals, solid ... -
Standard Test Methods of Static Tests of Wood Poles
Abstract: 4.1 Tests of wood poles are made to determine: 4.1.1 Data for use in establishing allowable stresses, 4.1.2 Data upon which to base economical pole line design, 4.1.3 Data on the strength properties of different species ... -
Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
Abstract: 5.1 Congealing point is a wax property that is of interest to many petroleum wax consumers. The procedure described here measures the temperature at which a sample being cooled develops a “set” or resistance to flow. At ... -
Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
Abstract: 5.1 Silica sand produces a slower rate of abrasion for organic coatings than that provided by silicon carbide. For some types of coatings, it may also provide greater differentiation. 5.2 The abrasion resistance scales ... -
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
Abstract: This specification covers electric-resistance-welded low-carbon steel pipe for use as process lines in chemical industries. The steel shall be aluminum killed steel made by one or more of the following processes: open-hearth, ...